The Model 1200 is a table-top vacuum and pressure furnace designed for process development and low volume production of flux-free and void-free soldered joints in microelectronic packages and components. The station is easy to use and designed for a wide variety of soldering tasks. A ramping temperature controller is combined with customized PLC's to provide automatic process control.
Maximum Operating Temperature | 450°C |
Minimum Vacuum Level | 100 millitorr (0.13 mbar) |
Maximum Operating Pressure | 50 psig (4.5 bar) |
Heated Area | 5.0 x 4.0 in (125 x 100 mm) |
Recommended Process Area | 4.5 x 3.5 in (115 x 90 mm) |
Thermal Uniformity Process Area | 5°C or better |
Maximum Heating Rate in Vacuum | 4°C/sec |
Process Gasses | N2 plus one optional inert gas at 75 psig (3.5 kg/cm²) |
Cooling Water | Optional - 1 gpm at 30 psig (4 lpm at 2kg/cm²) |
Electrical Service | 3.0 kVA max, 110 or 220 volts, single phase, 50/60 Hz |
Overall Size (W x D x H) | 30.5 x 25 x 19 in (78 x 64 x 48 cm) |
Weight | 180 lb (80 kg) |