Description:
-
Description
This combination is a complete kit with original light weight original solenoid mounting bracket (not a bulky aluminum unit where tight locations cannot be fitted) and a genuine MAC 35 series 3 port boost control Solenoid with (6mm) hose fittings. （The Genuine original MAC is not attached with the fittings) Makes it extremely compact Solenoid.
Only 2 wires and ports to connect making it an easy installation.
MAC solenoids are used with many different aftermarket electronic boost controllers, ECUs e.g., used by Turbosmart, AEM, Haltech, Vipec, Gizzmo, Autronic etc and we are offering this combination at a fraction of the retail price, and these are also the tuners favourite to replace the standard or aftermarket solenoid.
Please note that an ECU remap is required to gain the full potential of upgrading this boost control solenoid.
- Light weight original design not brittle aluminium!
- Design for automotive application
- ultra-low profile can fit in tight spot close to the actuator (reduce boost spike)
- Black anodized finishing
- Slim low profile light weight design.
- 8mm mounting bolt is included.
- 2 x Stainless solenoid mounting screws included.
- Now with free barbs!!
- Why pay more when you can buy direct
- Origina, high temperature high current black wires (not fake item with other colours wires)
- Direct replacement of the OEM boost control solenoids such as by Turbosmart, Cobb , AEM, HDi , Autronic, Haltech, Grimmspeed etc and many others !
- VERY reliable , high frequency reliable and achieve fast boost target.
- Compatible with almost all known ECU's - not suit for stepper motor type drivers
Please note the insurance is only be claimed if you have purchased before shipping and it is claimed by the buyer.
As the goods are very low cost it arealy incur any other charges and taxes but in a event of charges happened all other cost such as duty or local tax are not included in the postage.
As we are a drop shipping company shipping location is depends on the supplier and we will be informed by the supplier of where and when the goods is shipped from and in which warehouse
The delivery time will take 6-10 days.
We strive to sell the best product at the best price giving you maximum value in your purchase. All Products are tested before it is sent out. As you can see we have sold hundreds from our history and feedbacks, If you suspect a problem with the product please advice us if it is installed by a professional and send us the contact information of the professional installer, we will call them or email with them to find out what exactly the problem is, alternatively you can also send it back to us we can check it for you , if we found no problem with the unit we will send it back to you at your cost, but the checking is free, if it is found damaged by improper installation , we will quote you for the cost to repair or replace and return it to you at your cost , if it is found defective we will repair or replace a new one and send it back to you at our cost. Please make sure you send the return details and the address properly and the reason for sending it back
If you are dissatisfied with your purchase, simply return it to our warehouse (email us for the address) in its original condition (opened or installed products can not be refunded) and we will refund your purchase price (less shipping and 20 % restock handling cost).
Description:
-
Description
This combination is a complete kit with original light weight original solenoid mounting bracket (not a bulky aluminum unit where tight locations cannot be fitted) and a genuine MAC 35 series 3 port boost control Solenoid with (6mm) hose fittings. （The Genuine original MAC is not attached with the fittings) Makes it extremely compact Solenoid.
Only 2 wires and ports to connect making it an easy installation.
MAC solenoids are used with many different aftermarket electronic boost controllers, ECUs e.g., used by Turbosmart, AEM, Haltech, Vipec, Gizzmo, Autronic etc and we are offering this combination at a fraction of the retail price, and these are also the tuners favourite to replace the standard or aftermarket solenoid.
Please note that an ECU remap is required to gain the full potential of upgrading this boost control solenoid.
- Light weight original design not brittle aluminium!
- Design for automotive application
- ultra-low profile can fit in tight spot close to the actuator (reduce boost spike)
- Black anodized finishing
- Slim low profile light weight design.
- 8mm mounting bolt is included.
- 2 x Stainless solenoid mounting screws included.
- Now with free barbs!!
- Why pay more when you can buy direct
- Origina, high temperature high current black wires (not fake item with other colours wires)
- Direct replacement of the OEM boost control solenoids such as by Turbosmart, Cobb , AEM, HDi , Autronic, Haltech, Grimmspeed etc and many others !
- VERY reliable , high frequency reliable and achieve fast boost target.
- Compatible with almost all known ECU's - not suit for stepper motor type drivers
Please note the insurance is only be claimed if you have purchased before shipping and it is claimed by the buyer.
As the goods are very low cost it arealy incur any other charges and taxes but in a event of charges happened all other cost such as duty or local tax are not included in the postage.
As we are a drop shipping company shipping location is depends on the supplier and we will be informed by the supplier of where and when the goods is shipped from and in which warehouse
The delivery time will take 6-10 days.