Product Description
【Technical Specifications】Rated Output Power: 2000VA, Maximum PV open circuit voltage: 400Vdc, PV Array MPPT voltage range: 30-400Vdc, DC Input Voltage: 12Vdc, Nominal Output Voltage: 230Vac±5%, Max Charging Current: 80Amp; Output Frequency: 50Hz/60Hz, Cold Start Voltage: 11.5Vdc.
【LCD Display&Real-Time Monitoring】Solar inverter has an LCD display that shows the system data and operation status in real time. When you encounter a problem during use, the corresponding fault code will be displayed, which can help you solve the problem easily.In addition, this inverter has LED indicators, so you can see the operation of the inverter at a glance, which is very convenient.
【Charging & Output Modes】Solar Inverter support 4 charging modes(Choose solar power/Utility power/AC power to charge battery) and 3 output modes(choose Sola/Utility/Battery which source to power your load at first priority).
【Compatible 12V batteries】Compatible with various 12V batteries such as AGM, Gel, Lead-acid, Lithium-ion and LiFePO4 batteries. Built-in lithium activation along with comprehensive battery protection features including short circuit protection, over/under voltage protection effectively protects battery life.
PowMr 1600W Solar Hybrid Inverter 12V DC to 220V/230V AC is a new all-in-one inverter with an 80A MPPT solar controller that integrates solar energy storage and charges the energy storage and charges the AC sine wave output. It can be used in DC AC areas such as solar AC systems, vehicle systems, RV power supplies, security monitoring systems, emergency lighting systems, field power systems, household power systems, etc.
Advantages:
Suitable for 12V lead-acid (Seal, AGM, Gel, Flooded) and 12V lithium batteries (must be set via "Custom").
The input voltage range and other parameters for household appliances and PCs can be configured via the LCD settings.
Compatible with mains voltage or generator power.
Battery charging mode and load work mode can be set.
Automatic restart while AC is recovering.
Overload/over temperature/short circuit protection.
Intelligent battery charger design for optimised battery performance.
Cold start function.
NOTE :
Compared to the PowMr 1500W solar inverter, the PowMr 1600W inverter's starting voltage is only 60Vdc, which is half of 1500W. This also means that you only need to use fewer solar panels to start the 1600W inverter and activate the PV function.
PowMr 1600W solar inverter 12 V DC to 220 V/230 V AC work with 12V lead-acid and lithium batteries.
LCD display design and 3 LED indicators for dynamic display of system data and operating status, Configurable battery charging current, AC/solar charging priority and load supply priority via LCD setting.
NOTE : Suitable for 12V lead-acid and 12V lithium batteries (Select lithium battery mode to be set via "Custom").
Charging source priority: To configure the charging source priority.
Solar first: Solar energy is charged for battery as first priority. Utility only charges the battery when solar energy is not available.
Solar and Utility (default): Solar energy and utility energy charge the battery simultaneously.
Solar only: Solar energy will be the only charging source regardless of whether utility is available or not.
NOTE : When the inverter is operating in battery mode or energy saving mode, only solar energy can charge the battery. Solar energy will charge the battery when it is available and sufficient.
Output Source Priority: To configure the load power source priority (selectable option).
Solar First：Solar energy provides priority power to the loads.
This means that if the solar energy is not enough to power all the connected loads, the battery energy will power the loads at the same time.
Grid First (default): The grid supplies the loads with electricity as the first priority. Solar and battery energy only supply the loads with power when no grid power is available.
SBU Priority: Solar energy supplies the loads with power as the first priority. If solar energy is not sufficient to supply all connected loads, battery energy supplies the loads with power at the same time.
Tips: Which type of inverter is suitable for your appliances?
Electrical appliances are divided into two categories: resistive load and inductive load.
If you need the inverter to operate the resistive load (e.g. laptop, TV, electric cooker), please choose the inverter with continuous power higher than the rated power of the appliance, and it is best to use 80% of the rated power.
If you use a microwave oven, water pump, air conditioner and other appliances with motor or compressor, please select the inverter with continuous power 3-10 times higher than your appliance.
