LOOPER PRO GUITAR EFFECTOR
Preface
Thank you for purchasing the Looper Pro. In order to
let you easily experience the product, we are equipped with a detailed user
manual, from which you can get the introduction of the product and the
knowledge of how to use it.
Attentions
l The
power supply
Please ensure that the maximum operating voltage of
9V (10%) power transformer with negative inside and positive outside is not
more than 10V, otherwise it may cause equipment damage. Please unplug the power
when you don't need to use this product or in thunderstorm weather.
l The
connection
Be sure to turn off the power and other related
equipment before the effector connects or disconnects the device. This will
help prevent equipment failure and damage to other devices.
l Electrical
interference
Radio, television and other electromagnetic waves
may cause interference to the use of equipment, so please try to stay away from
radio and television and other equipment.
l Place
placed
Direct sunlight
Heat source
Magnetic field
High temperature or moist district
High humidity
Strong oscillation
Shaking
Main
Features
l
48K/24bit sampling rate, lossless, uncompressed, professional tone
quality.
l
The total recording time is 40 minutes, supporting unlimited
superposition recording.
l
9 loops, with a single loop recording as long as 10 minutes.
l
Built-in high sensitivity tuning function.
l
Support external pedal, more convenient operation.
l
Full metal shell, small but weighty; Colorful LED display, beautiful and
user-friendly. Single foot switch controls: Record, playback, overdub, undo,
redo, stop, delete.
l
Support Windows/Mac OS computer import/export loops ( WAV lossless audio),Windows needs no additional
installation of any software or driver.
Control Panel
①
Power input
Power supply, using 9V dc power adapter (negative
inside and positive outside).
②
USB connector
Uploading or downloading WAV loop files; connecting
external pedal.
③Loop level knob
Controls the loop playback volume.
③
Buttons (UP/DOWN)
Switching loops (Press both buttons to enter tuning
mode).
④
Audio output
1/4 ” mono audio jack, output signal.
⑥Screen
Displays the recording or playback progress bar,
loop number, and tuning status.
⑦Audio input
1/4”mono audio jack for connecting
instruments.
⑧Footswitch
Control looper functions (record, playback, overdub,
undo, redo, stop, delete).
Operation
Instructions (without recorded
data)
NO. |
Operation |
Function/state |
Display |
1 |
Power on |
Stop |
The screen
shows the loop number (for example)'1 |
2 |
Tap
footswitch once |
Stop→Recording |
The screen
shows1'and the red progress bar stepping |
3 |
Tap
footswitch again |
Recording→Playback |
The screen
shows1and the blue progress bar stepping |
4 |
Tap footswitch
again |
Playback→Overdub recording |
The screen
shows1’and
the red progress bar stepping |
5 |
Tap
footswitch again |
Overdub
recording→Playback |
The screen
shows1’ and
the blue progress bar stepping |
6 |
Press and
hold footswitch |
Playback→Undo/Redo |
Undo/Redo the
last recording track |
7 |
Double-tap
footswitch |
Playback→Stop |
The screen
shows'1and the blue progress bar |
8 |
Press and
hold footswitch |
Stop→Delete |
The screen
shows'1 |
Operation
Instructions (with recorded data)
NO. |
Operation |
Function/state |
Display |
1 |
Tap
footswitch once |
Stop→Playback |
The screen
shows'1’and
the blue progress bar stepping |
2 |
Tap
footswitch again |
Playback→Overdub |
The screen
shows'1’and
the red progress bar stepping |
3 |
Press and
hold footswitch |
Playback→Undo/Redo |
Undo/Redo the
last recording track |
4 |
Double-tap
footswitch |
Recording/Playback/Overdub→Stop |
The screen
shows'1’and
the blue progress bar |
5 |
Press and
hold footswitch |
Stop→Delete |
The screen
shows'1’ |
UI
As shown in figure: Please look directly at the
picture inserted above
Power on, the loop number'1'is displayed on the
screen Loop'1'refers to the first loop. You can switch to loop2, loop3 by
pressing the button or external pedal.
As shown in figure: Please look directly at the
picture inserted above
During recording , tap footswitch once,the screen will show the loop number'1', the first loop starts
playback and the blue progress bar is displayed synchronously. In this state,
long press the footswitch to undo/redo the latest recording track.
As shown in figure: Please look directly at the
picture inserted above
When there is no recording data , tap footswitch
once ,the screen will show the loop number'1', the first loop
starts recording and the red progress bar stepping.
As shown in figure: Please look directly at the
picture inserted above
During playback , double-tap the footswitch,the screen will show the loop number'1', the first loop starts
playback and the blue progress bar is displayed synchronously. In this state,
long press the pedal switch to delete the loop.
Loop Instructions
The pedal provides 9 loops, each of which can be
independently edited and used.
By pressing UP/DOWN to switch loops.
1.When switching the loop during playback, the
system shall wait for the completion of the current loop before switching, and
the new loop number will be displayed with flashing during the waiting process.
2.While not playing, the progress bar appears blue
if the loop has a recording.
USB Connector
Connect to PC for importing/exporting WAV audio
files. Note: when importing WAV files, rename the WAV files as Numbers 1.wav
(loop 1) ~ 9.wav (loop9). Each number corresponds to each loop. As shown in the
picture below: Please look directly at the picture inserted above
2. This product
can support wireless connection of an external pedal to facilitate switching
loops during performance. The function of using the pedal to switch the loop is
the same as the function of using the button to switch the loop. (This product
is equipped with a dedicated pedal, which needs to be purchased separately)
3. After the USB
connector connected to windows, as shown in the figure below, you can export or
import loops without install any software or driver.
Tuning Function
1.Press two buttons simultaneously to turn on/off
the tuning mode. The output will be mute.
2.There are 5 LEDs for tuning display,
■LED 1/2 lit: pitch is lower
■LED 3 lit: pitch is good
■LED 4/5 lit: pitch is higher
Technical Parameters
Maximum recording duration: 40 minutes
Single loop recording duration: 10
minutes
Overdub recording times: Unlimited
Number of loop: 9
USB connection type :
Micro-B USB
Input connection type: Standard 1/4”jack-mono/Ts
Output connection type: Standard 1/4"
jack-mono/TS
Power supply: Standard 9V direct current (negative
inside and positive outside)
Working current: 100mA (DC 9V)
Input impedance: 1M ohm
Output impedance: 100 ohm
Net weight: 300g
Dimensions (length x width x height):
90(D)x40(W)x49.5(H)mm
Accessory: Manual, USB Cable
Seller policy
Postage & Delivery
All products will be checked carefully and packed in good condition
before shipping.
In most cases, you will receive the product within 5-13 days. And we
offer free shipping with all items!
About order handling time, usually we ship in 1-2 business day after
receiving the clearing payment. We do offer Expedited shipping methods.
Note:
Due to shipping policies restrictions, our shop is unable to ship to
Alaska, Hawaii, Puerto Rico, US Protectorates and APO/FPO address.
Your satisfaction is our aim!
Payment Policy
We gladly accept payment methods eBay approved.
Both of us must comply with the rules and requirements of the eBay. We
want to make sure the transaction is legal and compliant.
If you have any requirements or requests, please contact via eBay
message.
Your satisfaction is our aim!
(After-Sales Service) Return and Exchange
If the product you receive has quality problems, please contact us in
time, we will refund you or replace the product after confirmation.
Your satisfaction is our aim!
Feedback
If you have any problems, Please don't give us a negative comment
without reasonable communication, please contact us in time. We’ll deal with
your problems and demands as soon as possible, to help you save money, give you
the best service quality and attitude, you can also buy High-Quality products
from our store!
The most important of all, Your Satisfaction is our aim!