Zigbee CC2531 CC2540 Sniffer CC Debugger Wireless Bluetooth 4.0 Downloader Cable
Product Image:
Product Description:
CC2531 Antenna
Description:
1. Size: 4.1 * 1.6 centimeters
2. Panel thickness: 1.6 mm
3. Operating frequency: 2.405-2.485 GHz
4. the Wireless Transmission Rate: 250 Kbaud
5. Energy consumption: <20mA (reception); <25mA (transmission)

Features:
1. Lead Out 8 Doors of IO
2. of Debug Pins
3. Firmware To Reach Matching Analyzer Function
Package included：
1*CC2531 USB Bluetooth 4.0 Protocol Analyzer Sniffer With External Antenna
 
CC Debugger
Description:
The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips.
It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging
And SmartRF Flash Programmer for flash programming.
The CC Debugger can also be used for controlling selected devices from SmartRF Studio.

Features：
1>. Contents in the box:
CC Debugger
Mini USB cable
10-pin flat cable with 2.54mm connector
2>. CC-Debugger can be used to program and debug the following 8051-based system-on-chips from Texas Instruments:
CC1110, CC1111
CC2430, CC2431
CC2510, CC2511
CC2530, CC2531, CC2533
CC2540, CC2541
CC2543, CC2544, CC2545
3>. It is possible to control the same devices from SmartRF Studio. In addition, CC-Debugger can control the following transceivers from SmartRF Studio:
CC1120, CC1121, CC1125, CC1175
CC1100, CC1101, CC110L, CC113L, CC115L
CC2500, CC2520
4>. It can also be used to program the PurePath Wireless devices:
CC8520, CC8521
CC8530, CC8531
5>. The CC Debugger works with IAR EW8051 version 7.51A or later

Package Included:
  1PC*Bluetooth simulator CC-Debugger
 
 
CC2531
Description:
1.Size: 4.1*1.6cm
2.Board Thickness:1.6mm
3.Operating Frequency:2.405-2.485GHz
4.Wireless Transmission Speed Rate:250Kbaud
5.Power Consumption:<20mA (receiving);<25mA (transmission)

Features:
1.Lead Out 8 IO Ports
2.Debug Pin
3.Matching Firmware To Achieve Analyzer Function

Package Included:
1 x CC2531 Sniffer Bare Board Protocol Analyzer Wireless Module USB Interface Dongle
 
 
CC2540
Introduction:
1.Size:4.1*1.6cm
2.Board Thickness:1.6mm
3.Operating Frequency:2.405-2.485GHz
4.Wireless Transmission Speed Rate:1Mbps
5.Power Cosumption:<20ma><25ma>
Features:
1.Lead Out 8 IO Ports
2.Debug Pin
3.Matching Different Firmware (Sniffer And BTool) To Achieve Bluetooth Adapter And Protocol Analyzer Function
4.The Dongle Can Be Used As Mini Bluetooth 4.0 Development Board
Package Include:
1 x Bluetooth 4.0 2.4GHz BLE CC2540 Sniffer Board USB Interface Dongle BTool packet
 
 
Downloader Cable
Product Introduction:
1.Length:29.65mm
2.Width:27.46mm
3.Height:10.95mm
 
Package Included：
1 x Downloader Cable Bluetooth 4.0 CC2540 for Zigbee CC2531 Sniffer USB Dongle

We appreciate your feedback very much. As it will motivate us do better. If you have any questions with our goods or service, Please kindly contact us firstly before leaving negative feedback. Thank you in advance

 

1. All merchandise will be carefully test before shipping. We will try our best to avoid any quality problem.

2. We promise warranty for quality in one year and we will repair it free of charge. The returning shipping should be paid by customer.

3. If you are not satisfied with the product, Please contact us. We'll provide you a satisfying solution.

1.Normmly we will send the goods within 1-3 working days after your payment is verified .

2.Please check if the goods are in good condition and sign before the delivery man leaves.If you find the product is lost or damaged on the way. Please take photo and let the delivery men confirm it. Then we will help you let the shipping company compensate you.