Features:
1. Convert the 0-200Hz frequency pulse into an analog voltage of 0-5V.
2. Can be used to Convert interface between PLC and frequency, Or movement control card and converter interface matching control .
3. Input pulse is 5V 12V 24V can be directly input, no string resistor. However, the input frequency should be maintained for more than 0.5 seconds.
4. The output current is 5MA.
5. Frequency and voltage conversion module, response is about 0.3-0.5 seconds.

Specification:
Condition: Brand New
Item Type: Frequency To Voltage Conversion Module
Model: FV-200Hz5V
Function: Input 0-200Hz frequency is converted to 0-5V
Output Current: 5MA
Response: 0.3-0.5 seconds
Size: Approx. 4.5 x 4.7 x 1.7cm / 1.8 x 1.9 x 0.7in

Package List:
1 x Frequency To Voltage Conversion Module

Precautions for use:
1. The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage.
2. The input power supply voltage range is 12-30VDC. It is recommended that the power supply voltage be 15-24VDC. When the 12V is used, the power supply cannot be powered by 12VDC. At least 15VDC power supply is required. If you need to use 12V power supply, you can also order 12VDC. Powered converter. At 24 s, the power supply needs to be powered by 24VDC
3. The input is isolated by diaphragm. Guaranteed anti-interference ability.
4. For use with PLC, support NPN type. Must have a ground wire.
5. If you need to use an encoder, the encoder should be rotated at a constant for more than 0.5 seconds.
6. Frequency and voltage conversion module, response is about 0.3-0.5 seconds.
7. If the input is , etc., due to matching, an 817 diaphragm and a resistor must be added to match the meter to normal function.
8. When using the correspondence, if there is a deviation, you can adjust the blue potentiometer on the board to adjust. At the of shipment, we have adjusted the F/V potentiometer to a certain correspondence. It is generally not recommended to adjust it by itself.

Identification and wiring:
1. 12-30V--Power input positive
2. GND--Power input negative (common ground wire)
3. GND--Pulse frequency input negative (common ground wire)
4. 0-10KHZ--Pulse frequency input positive
5. GND--Pulse frequency input negative (common ground wire)
6. 0-10V-- Analog 0-10V output

Correspondence & Linear Relationship:
20Hz is converted to 0.5V
100Hz is converted to 2.5V
200Hz is converted to 5V