Motorcycle 12V electric heating handlebar Modified intelligent five-speed temperature control handlebar cover riding warm heating accessories
Specification:
Product material: PVC
Input voltage: 9V-18V
Working voltage: 12V-16V
Output power: 20-40W
Operating temperature: -15°C-50°C
Applicable pipe diameter: diameter 2.2CM
Product accessories: glue × 1, throttle core × 1, handlebar plug * 2
Scope of application: suitable for DC12V scooters, motorcycles, beach bikes, three-wheeled motorcycles installed and used
Protection voltage: when the voltage is lower than (12 ± 0.2) V, the heated handlebar off the output, the controller into a dormant state
[Instructions for use]:
[1] red line for the positive pole, black line for the negative pole, please do not connect the wrong, otherwise it is easy to cause damage to the product
[2] energized to the controller, the indicator flashes 3, and enter the standby state [Note: the color of the indicator flashes green means normal, the color is blue means that the protection function does not work (controller failure), but also can be heated normally].
[3] in the standby state, press the button on the handle, if the power supply voltage is lower than the starting voltage of the electric heating, the red indicator light flashes a few times, into the standby state.
[4] In the standby state, press the button on the handle, if the supply voltage is higher than the electric heating starting voltage, the system will enter the rapid heating, so that the handle is quickly warmed up, and after a period of time, it will enter the stable heating.
[5] Under the working condition, every time the button is pressed, the electric heating power will be increased by 20%, with a total of 5 gears, and the color of the indicator lamps will be in the following order: blue-green-green-purple-red.
[6] In the working state, the power supply voltage is lower than the electric heating starting voltage, the corresponding gear indicator flashes, if the voltage is lower than this voltage within 7 seconds, the controller cuts off the electric heating output and enters into standby mode. If the voltage is lower than this voltage within
[7] In the controller will cut off the electric heat output and enter into standby mode.
In the working state, if the supply voltage is higher than the set maximum voltage, the controller will immediately cut off the heating output and enter the standby state.
Product Advantages
1. The product has a five-stage adjustment switch, the temperature can be adjusted at will, keep your hands warm in winter and say goodbye to frostbite.
2. Built-in intelligent chip, when the voltage is too high or too low, automatically cut off the power supply into standby mode, safer to use.
3. High-strength waterproof design, not afraid of wind and rain, rain and snow can also be used normally
4. The plug at the end of the handle is removable, can be sealed or through the mouth, more convenient to use at will.
5. Can be installed on DC12V motorcycles, scooters, beach bikes, three-wheeled motorcycles, a wider range of applications
