The Dayton Audio Signature Series was designed to give DIY speaker designers access to the pinnacle of speaker technology at the value expected from Dayton Audio. Featuring an open aluminum cast frame, anodized aluminum cone and a polyimide former, these drivers can provide extended range with incredibly low distortion. After hours of painstaking engineering and testing with meticulous attention to detail, we at Dayton Audio deem this driver line worthy of the endorsement of even the most critical audiophile.
Key Features
Brand | Dayton Audio |
Model | SIG120-4 |
Part Number | 295-650 |
UPC | 848791009051 |
Unit of Measure | Each |
Weight | 1.85 |
Product Specifications | |
---|---|
Nominal Diameter | 4" |
Bolt Circle Diameter | 4.33 |
Power Handling (RMS) | 40 Watts |
Power Handling (MAX) | 80 Watts |
Impedance | 4Ω |
Frequency Response | 75-8500Hz |
Sensitivity | 89.7dB 2.83V/1m |
Voice Coil Diameter | 1" |
Thiele-Small Parameters | |
---|---|
Resonant Frequency (Fs) | 74.6Hz |
DC Resistance (Re) | 3.7Ω |
Voice Coil Inductance (Le) | 0.22mH |
Mechanical Q (Qms) | 4.84 |
Electromagnetic Q (Qes) | 0.47 |
Total Q (Qts) | 0.43 |
Compliance Equivalent Volume (Vas) | 0.109ft³ |
Mechanical Compliance of Suspension (Cms) | 0.68mm/N |
BL Product (BL) | 5T·m |
Diaphragm Mass Inc. Airload (Mms) | 6.7g |
Maximum Linear Excursion (Xmax) | 4mm |
Surface Area of Cone (Sd) | 56.4cm² |
Materials of Construction | |
---|---|
Cone Material | Aluminum |
Surround Material | Rubber |
Voice Coil Former | Kapton® / Polyimide |
Basket / Frame Material | Cast Aluminum |
Mounting Information | |
---|---|
Overall Outside Diameter | 4.84" |
Baffle Cutout Diameter | 3.74" |
Depth | 2.33" |
# Mounting Holes | 6 |
Recommended Enclosure Volume | |
---|---|
Sealed Volume | 0.05ft³ |
Sealed F3 | 130Hz |
Vented Volume | 0.148ft³ |
Vented F3 | 68.9Hz |