PACKAGE CONTENT :
Note: e-Paper and Microcontroller are NOT included.
e-Paper Shield x1
Wiki : www.waveshare.com/wiki/e-Paper_Shield
This is a universal driver board for Arduino/NUCLEO and e-Paper raw panels, can be used to drive various SPI interface e-Paper from Waveshare.
(Note: e-Paper Display and Microcontroller are NOT included.)
Standard Arduino connectivity, compatible with host boards like UNO, Leonardo, NUCLEO, XNUCLEO
Onboard voltage translator, compatible with 3.3V/5V MCUs
Onboard external RAM, more available space
Micro SD slot, images can be stored on TF card for displaying
Reserved control interface, for connecting with other control boards/li>
wiki English manual (examples for Arduino/STM32)
Operating voltage: 3.3V/5V
Interface: 3-wire SPI, 4-wire SPI (default)
RAM size: 1M-bit / 128K-byte
Outline dimension: 53.34mm × 53.34mm
PIN | ARDUINO/NUCLEO PIN | DESCRIPTION |
VCC | 5V | Power |
GND | GND | Ground |
SCK | SCK | SPI clock input |
MOSI | MOSI | SPI data input |
MISO | MISO | SPI data output |
EPD_CS | D10 | e-Paper chip selection |
EPD_DC | D9 | e-Paper data/command |
EPD_RST | D8 | e-Paper reset |
EPD_BUSY | D7 | e-Paper busy |
SD_CS | D6 | SD card chip selection |
SPIRAM_CS | D5 | SPI RAM chip selection |