|
|
||||||
|
|
|
|
Features:
Descriptions:
Replace for Hydraulic Log Splitter Cylinder Rebuild Seal Kit
Fit for 5.0" Bore x 2.0" Rod Cylinder
For 5.0" Bore x 2.0" Rod Cylinder
Please Read Below Carefully to Check that the Kit Fits Your Cylinder Before Use
For Cylinder tube Bore (I.D.) 5.0" x rod (O.D) 2.0"
ITEM 1 | Rod dust ring: 50.8mm x 60.3mm 5.5mm /7.3mm, TPU |
ITEM 2 | Rod O-ring: 50.8mm x 63.5mm x 5mm, CPU. There is O-ring inside. It is a compound seal ring to make sure better seal and longer life. It is one of most important seals to prevent oil leakage. |
ITEM 3 | Rod wear ring: 50.8mm (ID 2”) x 57.15mm (OD 2.25”) x 9.5mm (0.375” wide) Nylon |
ITEM 4 | Gland O-ring: 118mm x 5.3mm, NBR |
ITEM 5 | Gland Backup ring: 127mm x 118.4mm x 1.5mm, PIFE (Please note: the backup ring is support O ring to against pressure, so it will be installed at outside of O-ring. See drawing for position. It is one of most important seals to prevent oil leakage.) |
ITEM 6+7 | Piston seals: square ring and O-ring. Square ring: D127mm x 117mm x 3.28mm, CPU; O-ring (installed under the square ring): 115mm x 2.65mm, NBR |
ITEM 8 | Piston wear ring: 127mm (OD 5”) x 120.65mm (ID 4.75”) x 9.5mm (0.375” wide), Nylon |
ITEM 9 | Rod and piston assembly O-ring: 32mm x 2.65mm, NBR (NOTE: In mots case, this seal might not be needed to replace. This seal might be different size on some aftermarket model. We add one common size 34.5mm X 1.8mm as extra. It is standard O-ring. If our 2 O-rings are not the size with your cylinder, you can easily find it at any local store, such as Home Depot.) |
ITEM 10 | Steel wire spring: it is option item for your cylinder rebuild. You might not need it to replace your old one if it is not damaged during disassembly. Please be sure if our wire ring OD is not same with your old one, please don’t use it. |
Package Includes:
1* Hydraulic Log Splitter Cylinder Rebuild Seal Kit
Item Specifics | |
---|---|
Brand | WM-Auto |
Manufacturer Part Number | WMQP-1799 |
Type | Hydraulic Log Splitter Cylinder Rebuild Seal Kit |
Material | rubber, plastic and steel |
Compatibility | for 5.0" Bore x 2.0" Rod Cylinder |
Warranty | 1 Year |
Accepted: Payoneer, Paypal, Credit Card, Debit Card and many other mothods.
Please make sure your shipping address is correct before we ship.
Return postage is the responsibility of buyer unless the return is a result of our mistake.
And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.
We maintain high standards of excellence Four 5-star rating and strive for 100% customer satisfaction! Positive Feedback
is very important to us. If you are not satisfied with our product or our Service, please feel free to contact us immediately.
Our office hours :
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
Shop Category Picture Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Replace for Hydraulic Log Splitter Cylinder Rebuild Seal Kit, Fit for 5.0" Bore x 2.0" Rod Cylinder
Features:
Descriptions:
Replace for Hydraulic Log Splitter Cylinder Rebuild Seal Kit Fit for 5.0" Bore x 2.0" Rod Cylinder
For 5.0" Bore x 2.0" Rod Cylinder
Please Read Below Carefully to Check that the Kit Fits Your Cylinder Before Use
For Cylinder tube Bore (I.D.) 5.0" x rod (O.D) 2.0"
Package Includes: 1* Hydraulic Log Splitter Cylinder Rebuild Seal Kit
Payment
Accepted: Payoneer, Paypal, Credit Card, Debit Card and many other mothods. Shipping
Please make sure your shipping address is correct before we ship. Returns
Return postage is the responsibility of buyer unless the return is a result of our mistake. Feedback
We maintain high standards of excellence Four 5-star rating Contact Us
Our office hours : - 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday All rights reserved. |