PACKAGE CONTENT:( NOT include Raspberry Pi Pico.)
Pico-ePaper-3.7 x1
PH2.0 8PIN wire 20cm x1
Standoff pack x1
WIKI English Manual: waveshare.com/wiki/Pico-ePaper-3.7
Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect
Ideal for price tags, shelf labels, industrial instruments...
Size3.7"
Resolution480×280
Viewing Angle>170°
Display ColorBlack and White
Grey Scale4
CommunicationSPI
Display PanelE-paper
ExperiencePaper-like
Comfortably ReadingEye Care, No Bluelight
EnvironmentAmbient Light Required
Display TypePassively Reflective
Power ConsumptionUltra Low
Display DurationPersists without Power
RefreshingPartial Refresh Support
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, requires minimal IO pins
Onboard voltage translator, compatible with 3.3V / 5V MCUs
Wiki English manual (Raspberry Pi Pico C/C++ and MicroPython examples)
OPERATING VOLTAGE | 3.3V/5V | DISPLAY COLOR | black, white |
RESOLUTION | 480×280 pixels | GREY SCALE | 4 |
INTERFACE | 3-wire SPI, 4-wire SPI | VIEWING ANGLE | >170° |
PARTIAL REFRESH TIME | 0.3s | FULL REFRESH TIME | 3s |
OUTLINE DIMENSIONS | 95.3 × 56.9mm | DISPLAY SIZE | 81.12 × 47.32mm |
REFRESH POWER | 26.4mW (typ.) | STANDBY CURRENT | <0.01uA (almost none) |
DOT PITCH | 0.169 × 0.169mm |
|
|
Onboard Female Pin Header For Direct Attaching To Raspberry Pi Pico
For Use With Other Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32
VCC | 3.3V/5V |
GND | Ground |
DIN | SPI MOSI pin |
CLK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data / Command selection (high for data, low for command) |
RST | External reset, low active |
BUSY | Busy status output |
Compatible With 3.3V / 5V MCUs