About Grease Accessories:

There are two types of products, one is with grease accessories, the other is without grease accessories.

The parts without grease do not affect the use and quality of the parts, and the product has been pre-greased before leaving the factory, so the customer does not need to add additional grease.

Fit For:

2004 - 2009 Nissan   QUEST   

Package Includes:

1x Part# Front Lower Left Control Arm + Ball Joint - K620560
1x Part# Front Lower Right Control Arm + Ball Joint - K620561
1x Part# Front Left Sway Bar End Link - K80255
1x Part# Front Right Sway Bar End Link - K80256
2x Part# Front Inner Tie Rods Ends - EV800227
2x Part# Front Outer Tie Rods Ends - ES800404

Features

Type:Control Arm & Ball Joint Assembly

Interchange Part Number:K620560 K620561 K80255 K80256 EV800227 ES800404

Location:Front+Left+Right+Lower

Professional Installation is Highly Recommended

NOTES:

1.Please carefully check whether the product matches the model before purchasing.Please check above compatibility list to make sure it fits your vehicle.

2.Take note of some of the things that go into product installation.

3.After the buyer purchases, we will send the goods within a short time, so that the buyer can receive satisfactory goods as soon as possible.

4.eBay only allow one tracking number uploaded for one order. you might not get the shipping information in time,Therefore, when you don't get your order completely, please don't worry, and contact me first by eBay message. We will check the situation and respond to you as soon as possible.

Control Arm

Conditions under which the control arm needs to be replaced:

(1)Noise (squeak, crunch, rumble).

(2)Deteriorating driving performance.

(3)Turn increasingly blurred and imprecise.

(4)Uneven tire wear.

Installation site:

The control arm connects the hub and the frame of the car. There are ball joints on the hub side and bushings on the frame side to achieve up and down instead of forward and rearward.

Function:

The control arm is used to transmit the required supporting force of the wheel and to withstand all the front and rear direction stresses.

Ball Joint

Condition for ball joint to be replaced:

If your ball joint fails, you will listen to a strange sound while driving. And that sound may help you to realize that your ball joint has failed and you have to renew them.

Installation site:

In front front drive vehicles, the ball joint is installed between the front axle axle and the wheel. In front and rear drive vehicles, the ball joint is installed between the transmission output shaft and the drive axle main reducer input shaft.

Working principle:

The ball joint is connected to the automobile suspension and steering system through the connection of the ball head shaft and the ball seat, and ensure the fixed connection of the wheel and the body. It is a very important part of the automobile suspension system, and plays a crucial role in the smoothness and safety of the car.

Tie Rod End

Condition that the tie rod needs to be replaced:

If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely.

This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod.

Function:

(1)to prevent the rod body torsion.

(2)Prevent the car from rolling sideways.

(3)improve the smoothness of the car, improve the comfort of driving.

Sway bar

The condition that the Sway bar needs to be replaced:

While driving, the following signs may indicate a faulty sway bar stabilizer link:

(1)Rattling and thumping noises on rough roads.

(2)Imprecise vehicle handling.

(3)Stronger inclination of the vehicle during cornering.

Function and effect:

Sway bars transmits the torsional force between the body and the chassis to the stabilizer of a particular axle. Depending on the design of the front or rear axle, they form the necessary connection for optimal interaction between the wheel guide and the stabilizer. The body roll of the vehicle in the turn is minimal to ensure safe road holding. When the vehicle is in fast turns or in irregular road situations help reduce body roll, while achieving balanced handling and limiting body roll in corners to improve tire adhesion. Simply put, when the car turns at high speed or drives on the uneven road surface, it will be a little twisted, and it is easy to tilt, causing the vehicle to roll over. The function of the balance bar is to improve the stability of the body when turning, so that the car will not tilt excessively.