Processor Broadcom BCM2711, quad-core Arm Cortex-A72
Clock rate 1.5 GHz
Processor cooling Passive with heat sink
RAM 1 GB LPDDR4
Flash memory 8 GB (Article No.: 100362)
***
Housing dimensions (H x W x D) 96 x 45 x 110,5 mm
Housing type DIN rail housing (for DIN rail version EN 50022)
Housing material Polycarbonate
Weight approx. 197 g / 224 g (incl. connectors)
Protection class IP20
Power supply 12 ... 24 V DC -15 % / +20 %, reverse-polarity protected
Max. power consumption 20 Watt (incl. 1 A total USB output current) 1
Allowable operating temperature -25 ... +55 °C
Allowable storage temperature -40 ... +85 °C
Max. relative humidity (at 40 °C) up to 93 % (non-condensing)
Interfaces 2 x USB A (Total current draw from both sockets max. 1 A) 2
2 x RJ45 10/100 Ethernet (using separate MAC addresses)
1 x RS485 screw-type terminal
1 x Micro-USB (solely for image transfer to eMMC)
1 x Micro HDMI 2.0a (4K)
1 x PiBridge system bus
1 x ConBridge system bus
Connectors 1 x 4-pole screw-type terminal for relay contact and signal input
1 x 4-pole screw-type terminal for power supply
***
Number of digital input channels 1
Digital input type 24 V control voltage (e.g. for power-good signal of a UPS)
Input thresholds approx. 3.0 V (0 -> 1) resp. 2.3 V (1 -> 0)
Input protection against overvoltage, negative voltages
Number of digital output channels 1
Output type Relay contact, approval up to 30 V switching voltage (e.g. for
power supply of a router)
Maximum current load of the contact 2 A 30 V DC (resistive load!)
Software interface of input and output Via GPIOs and process image. Output is optionally switched by
hardware watchdog.
Hardware watchdog functionality Can be disabled by bridging the 4-pole screw-type terminal. Reset by toggling a GPIO or alternatively a bit in the process image..
Hardware watchdog intervall Trigger after approx. 60 seconds without toggling the reset
bit.
Compatible modules for system expansion All RevPi IO modules and RevPi Gate modules can be connected via the PiBridge system bus.
All RevPi Con modules can be connected via the ConBridge system bus.
ESD protection 4 kV / 8 kV (according to EN61131-2 and IEC 61000-6-2)
EMI tests Passed (according to EN61131-2 and IEC 61000-6-2)
Surge/Burst tests Passed (according to EN61131-2 and IEC 61000-6-2)
Buffer time RTC min. 24 h
Optical indicator 6 status LEDs (bi-color), two of them freely programmable
Conformity CE, RoHS
UL certification Yes, UL-File-No. E494534