The 2 bay raid enclosure equipped with high-speed USB-B 3.0 5Gbps port. Built-in hardware RAID solution, designed to meet the storage needs of home and individual users.
This 2.5-inch RAID enclosure has great flexibility, which is suitable for creative workflows, project archives, system backups, video editing or surveillance systems.
Hardware RAID-RAID 0/1/SPAN
Compatibility
Compatible with Windows, Linux and Mac OS system. No driver needed.
|
|
|
---|---|---|
Step 1Remove the bottom screw and open the front panel. |
Step 2Take out the trays and fix the hard drive with two screws on both sides of the tray separately. |
Step 3Insert the trays, close the front panel, and tighten the bottom screw. Please pay attention to the orientation of the two trays. |
Step 1. Right click the Computer Management. Select "Manage", find "Disk Management'".
Step 2. Toggle the RAID control switch on the back to the "Normal" position as the picture showed.
Step 3. While Pressing and holding the Set button, press the Power button to turn it on. Press and hold the "Set" button until you can see the New Disk in the "disk management". And then turn off the enclosure.
Step 4. Toggle the RAID control switch to the RAID mode you want, and then hold the "SET" button and turn on the power at the same time. Press and hold the "Set" button until you can see the New Disk in the "disk management". The RAID mode will be set successfully.