Welcome to our store!
To avoid you buying the wrong parts, DO CHECK the compatible chart above before placing order.
-
Choose a vehicle from the "My Garage" list. Or
-
Enter your vehicle's details with Year / Make / Model / Trim / Engine. Or
-
Contact us: Ask us for double check.
Fits
- 2006-10 Ford Explorer Front Driver Side & Passenger Side Suspension Strut Assembly
- 2006-10 Mercury Mountaineer Front Driver Side & Passenger Side Suspension Strut Assembly
Product Introduction
- Shock, also called Snubber, device for controlling unwanted motion of a spring-mounted vehicle. On an automobile, for example, the springs act as a cushion between the axles and the body and reduce the shocks on the body produced by a rough road surface. Some combinations of road surface and car speed may result in excessive up-and-down motion of the car body. Shock absorbers slow down and reduce the magnitude of these vibratory motions. Modern shock absorbers are hydraulic devices that oppose both the compression and the stretch of the springs. The direct-acting, or strut, type is attached to the vehicle frame and the axle by two eyes. One eye is attached to a piston that slides in an oil-filled cylinder attached to the other eye. Any relative motion between the frame and the axle causes the piston to act against the oil in the cylinder. This oil has to leak through small openings or pass through a spring-loaded valve. In this way, a force is created that opposes the contraction and stretching of the springs, and the vibration of the body is dampened.
Features
- 100% BRAND NEW and tested to meet or exceed OEM specifications
- Premium ISO/TS 16949 quality - guaranteed highest quality available
- Each complete assembly is built to meet or exceed exact OEM specifications.
- High corrosion resistance and long service life.
- Steel rod is mirco-polished with double chrome plate.
- Engineered for superior durability, backed by industry leading warranty.
- Each shock and strut is individually tested before leaving the factory.
Package Include
- 2X Complete Strut Shocks Springs
How Long Do Shock Absorbers Last?
- Like every car part, shock absorbers are prone to fatigue and wear. Therefore, it’s always important to pay attention to the quality of your ride and have your shock absorbers checked regularly. The lifespan of a shock absorber depends on several factors including your car’s mileage, your driving style, road conditions, and more. But in general, shock absorbers are considered consumables, just like your car’s tires and brake pads. Thus, it’s a good idea to have them looked at around the 30,000-kilometer mark, and replaced at 50,000 kilometers.
6 Signs of Worn or Faulty Shock
- Vibrating Steering Wheel
- Your Vehicle Shakes or Sways While Driving
- Your Vehicle Rolls or Sways Excessively in Corners
- Uneven Tire Wear
- Excessive Nose Dive and Squat
- Fluid Leak on the Shock Absorbers
How to Replace?
Replacing shocks and struts can be dangerous if you don't know what you're doing. Read through these instructions carefully before attempting to dismantle your vehicle to ensure safety and efficiency throughout the project.
- Spring Compressor
- The shocks and struts on many vehicles are integrated with springs that can pop off and injure you or damage your vehicle if not removed properly. In such cases, you'll need a spring compressor in order to take everything apart safely.
- You can rent a spring compressor from your local auto parts store but it's important to understand how to use it. This is the most integral function for replacing shocks and struts and you need to be careful. If you have any doubts about removing the springs, you should consider taking your vehicle to a mechanic instead.
- Raise the Vehicle
- Once you have all of your parts and tools ready, you should raise your vehicle one side at a time using a car jack. After it's up, place a jackstand behind the front wheel to ensure stability. Otherwise, you can use a lift.
- Just make sure the vehicle is secure before attempting to loosen anything or getting under the vehicle.
- Remove Old Shocks and Struts
- First, you'll need to remove the wheels. Next, using your spring compressor, you'll look for three bolts at the bottom of the shock or strut that holds it in place. Loosen these bolts but don't remove them completely just yet.
- On the top of shock or strut is another bolt inside the engine compartment. You can use an impact wrench with a socket extension to loosen it. Get this loose and finish removing the other bolts and your shock or strut should come free.
- Installing New Shocks and Struts
- Once the old shocks and struts have been removed, you can simply replace the new ones. Make sure that you tighten all of the bolts securely. You will probably need a torque wrench to do this.
- Put the wheels back on the vehicle and you're ready to test it out.
Notice
- Please check your vehicle compatibility before buying.
- Please check your old number and pictures before buying
- Any modifications to an item of any kind before contacting us will void any and all warranty coverage for this item. Please contact us before modifying the part so that we have the opportunity to correct the situation.
| Item Specifics | |
|---|---|
| UPC | Does not apply |
| Brand | CSsunny |
| Manufacturer Part Number | 11145127 |
| Adjustable | No |
| Features | Sealed |
| Placement on Vehicle | Front |
| Quantity | 2 pieces |
| Type | Complete Strut Assembly |
| Platform | Universal |
| Interchange Part Number | 171124,Full strut assembly,Driver Side Passenger side |
| Superseded Part Number | 2 Piece Set Complete Strut Assembly New Ready to Install |
| Included Hardware | None |
| OE Spec or Performance | OE Spec |
| Surface Finish | Powder Coat |
| Custom Bundle | Yes |
| Kit Parts Included | Shock Aborber,Boot,Bumper Kit,Spring Seat,Coil Spring,Isolator |
| Gas Charged Shock | Yes |
| Product Type | Complete Struts Assembly with Coil Spring |
| Modified Item | No |
| Size | Single Dimension(CM) 71.00(length)*34.60(width)*16.50(height) |
| Single Weight(KG) | 19.83 |
| Items Included | Coil Spring |
| Color | Gloss Black |
| Finish | Polished |
| OE/OEM Part Number | 2 Piece Set Complete Strut Assembly New Ready to Install |
| Manufacturer Warranty | 1 Year |
| Material | Steel |
| Country/Region of Manufacture | Unknown |
| Extended Length (in.) | 20.420 |
| Universal Fitment | No |
| Vintage Car Part | No |
| Compressed Length (in.) | 19.320 |
About Us:
We are committed to making the best auto-parts products and providing you with better services.
So if you have any quesiton or problem, please fell free to contact us about that.
Payment:
Paypal only.
Shipping:
2-8 working days in transit.
Product will be shipped within 2 business days after full payment is received and verified.
USPS, UPS, FedEx shipping will be provided.
Delivery time is about 2-8 business days to most of addresses.
Returns:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
30-day free return provided.
Contact Us:
Any quesiton or problem, do contact us please.
We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.
