LM2596S DC 5V-36V to DC 1.5V-33V
Input Voltage: 5V-36V
Output Voltage: 1.5V-33V (0.5V step)
Maximum Output Current: 3A
Rated Output Current: 2A
Dimension (L x W x H): Approx. 60 x 40 x 16mm
LM2596 XL6009 Step Up-Down
Input: 3.5-28V.
Output: 1.25V-26V.
Maximum input current 3A.
Maximum output 3A.
Rated input 1A, Output 1A.
LM2596 With Digital Tube
In+: Input positive
In-: Input negative
Out+: Output positive
Out-: Output negative
Dimensions: 62 *26 *14mm(L*W*H)
Ripple peak: About 100mV
Display color: Red/Green/Blue
Input voltage: 4.5-28V
Output power: 15W maximum
Output voltage: 1.3v-25v
Output current: 1.5A
Ripple frequency: About 150KHZ
Voltage meter accuracy: ±(5 ‰ +1 digit)
Static power consumption: Typical about 20mA
LM2577 LM2596 Step Up-Dow
Input Voltage :4-35V
Output voltage: Continuously adjustable(1.25-25V unload adjust)
Output current: 3A Max(If more than 15W, please install the heat sink)
CC range :0-2A (adjustable)
Revolving light current: CC value * (1%-100%), default is 0.1 times
Minimum voltage difference: 2V
Output power: natural cooling 15W
Conversion efficiency: 80% (the higher the output voltage, the higher the efficiency)
Operating Temperature: Industrial (-40 ℃ to +85 ℃) (ambient temperature more than 40℃, lower power use, or add heat sink)
Full load temperature rise: 45 ℃
Indicator: CC indicator is Red, charging indicator is Red, charging completed the indicator is Blue.
Output short circuit protection: Yes, constant current.
Connect method: Can solder on the PCB with wire directly
Input: IN+ input Positive is, IN- input negative
Output: OUT+ output is positive, OUT- output negative
Module Size: 50 x 37 x 13mm
LM2596 Buck Display Module
Wide Input voltage: 4.5-40V.
Output Voltage: 1.25-37V (Adjustable).
Output current: rated current 2A, 3A MAX ( Heat-sink Needed).
If you need its output power greater than 2A/10W, please add with heat-sink.
Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency).
Switching Frequency: 150KHz.
Rectifier: Non-Synchronous Rectification.
Module Properties: Non-isolated step-down module (buck).
Short circuit protection: current limiting, since the recovery.
Operating temperature: Industrial grade (-40 to +85 ) (output power 10W or less).
Full load temperature rise: 40.
Load regulation: ± 0.5%
Voltage regulation: ± 2.5%
Dynamic response speed: 5% 200uS.
Size:8x4x1.5cm(approx)
LM2596 step down Module
4.75-24V input voltage range
Output voltage range: 0.93 V-18V
Output Current: continuous 2.5A peak output 4A output!
Switch: with Soft-off feature! Shutdown current as low microampere level!
Size: 45mm * 32mm * 1.6mm
Technical Description:
Using synchronous rectification technology! The highest efficiency up to 98%!
Efficiency measured: 12V to 5V:
12V turn 5V efficiency = (5V * 1.001A) / (12V * 0.431) = 96.7%
DC-DC Solar Step Up-Down
Input: 3.5-28V.
Output: 1.25V-26V.
Maximum input current 3A.
Maximum output 3A.
Rated input 1A, Output 1A
LED Drive Module
Input Voltage: 5-35V
Rated Output Current: 3A
Output Voltage: Continuously adjustable from 1.25 V to 30V
LM2596S 6V~40V to 0~36V 0-3A
1.Digital display, convenient and easy to use
2.Constant voltage and constant current state
3.OUT,CV and CC indicator light
4.Adjust output voltage and current value accurately
5.Automatic/Manual switch voltage, current, power, capacity and other parameters dispaly
6.It can be set whether automatic output or not after elestrify
7.It can be set whether take turns to display voltage, voltage, current, power and capacity or not after output.
8.It can be set whether take turns to display voltage, current, power and capacity or not after output
9.10 groups of storage location, free storage and bring up.
10.One key to save voltage and current value
LM2596(Plug-in capacitor)
Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)
Switching Frequency: 150KHz
Rectifier: Non-Synchronous Rectification
Module Properties: Non-isolated step-down module (buck)
Short circuit protection: current limiting, since the recovery
Operating temperature: Industrial grade (-40 to +85 ) (output power 10W or less)
Full load temperature rise: 40
Load regulation: ± 0.5%
Voltage regulation: ± 2.5%
Dynamic response speed: 5% 200uS
LM2596HVS
Input voltage range: 5V-60V (55V maximum continuous below)
Output voltage range: 1.25V-26V (adjustable output)
Fixed output arbitrary choice between 1.25V-26V
Output current: rated current 2A, maximum 3A (need to add heat sink), if the output power greater than 20W, suggested adding fins
Conversion efficiency: up to 92% (output voltage, the higher the efficiency)
Switching Frequency: 150KHz
Minimum pressure: 3V
Full load temperature rise: 40 ℃
Load regulation: ± 0.5%
Voltage regulation: ± 0.5%
Dynamic response speed: 5% 200uS
Connection: Welding
Output with indicator
IN + input positive,
IN- input is negative,
OUT + output positive,
Negative output OUT-
Dimensions: L * W * H 50mm * 25mm * 14mm
LM2596 Module
*Module Properties: non-isolated constant current and voltage module
*Rectification: non-synchronous rectification
*Input voltage: 7V-35V
*Output voltage: 1.25V-30V
*Output current: adjustable maximum 3A
*Conversion efficiency: 92% (the highest)
*Switching frequency: 150KHz
*Output ripple: 50mV (max) 20M bandwidth
*Load Regulation: ± 0.5%
*Voltage Regulation: ± 2.5%
*Operating Temperature: -40 ℃ to +85 ℃
LM2596 CC/CV Constant Current
Input Voltage: 5-35V
Output Voltage: Continuously adjustable from 1.25 V to 30V
Rated Output Current: 3A
Max. Output Current: 4A (more than 15W, preferably with a heat sink)
Size (L x W x H): Approx. 1.9 x 0.95 x 0.5 inch / 4.8 x 2.4 x 1.3cm
Indicator Light
Constant current indicator(red)
Charging indicator(red)
Charged full (Green or Blue)
LM2596HV module
Input voltage:4.5V-45V
Output voltage:1.23V~35V
Output current:3A（MAX）
Transfer efficiency:92%（Highest）
Output Ripple: Switching frequency:150KHz
Operating temperature:-45℃~ +85℃
Size:43mm * 21mm * 14mm（Length*width*height）
LM2596 With Voltmeter Blue Board
1、Input voltage range:4～40VDC
2、Output voltage range:1.25-37VDC adjustable
3、Output current:2A
4、voltmeter range: 0 to 40V, error ±0.1V
5、Input reverse polarity protection
6、Built in output short protection function
7、Built in thermal shutdown function
8、L x W x H =6.1*3.4*12 cm
9、Weight: 22g
10、LEDdigital voltmeter tube, the accuracy is adjustable function, can be aimed at
your multimeteradjustable accurate.
11、Press the rightkey to let the display show the input or output voltage. when the right “OUT” led light, it shows output, the left “IN” led show input.
LM2596 step down
Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)
Switching Frequency: 150KHz
Rectifier: Non-Synchronous Rectification
Module Properties: Non-isolated step-down module (buck)
Short circuit protection: current limiting, since the recovery
Operating temperature: Industrial grade (-40 to +85 ) (output power 10W or less)
Full load temperature rise: 40
Load regulation: ± 0.5%
Voltage regulation: ± 2.5%
Dynamic response speed: 5% 200uS
Specification:
Input voltage:4.5-40V
Output voltage:1.5-35V(Adjustable)
Output current:Rated current is 2A,maximum 3A(Additional heatsink is required)
Dimension:43*20*14mm(L*W*H)
LM2596 With Voltmeter Green Board
1、Input voltage range:4～40VDC
2、Output voltage range:1.25-37VDC adjustable
3、Output current:2A
4、voltmeter range: 0 to 40V, error ±0.1V
5、Input reverse polarity protection
6、Built in output short protection function
7、Built in thermal shutdown function
8、L x W x H =6.1*3.4*12 cm
9、Weight: 22g
10、LEDdigital voltmeter tube, the accuracy is adjustable function, can be aimed at
your multimeteradjustable accurate.
11、Press the rightkey to let the display show the input or output voltage. when the right “OUT” led light, it shows output, the left “IN” led show input.
LM2596HVS 60V 3A
Type: DC/DC Constant Current / Constant Voltage
Size: (L*W*H)4.80*2.40*1.4cm/1.89"*0.94"*0.55"
Input Voltage: 5V-57V input voltage must be higher 2V than the output voltage
Output Current: rated current 2.5A/ 3A MAX ( Heat-sink Needed)
Output Voltage: 1.25-30V (Adjustable)
Output Power: 15w max at maximum voltage
Output short circuit protection: Yes, constant current (constant current setting values)
Input reverse polarity protection: Yes,
Constant current range: 0.2-3A (adjustable, default transferred 1A)
Turn lamp current: constant current value * (0.1), turn the lamp current constant current value Linkage
LM2596 Double USB
Input voltage: 6V-40V
Output voltage: 5V
Output current: 3A
Switching frequency: 150KHZ
Conversion efficiency: 92%
Working temperature: -40 to +85 degree Centigrade
Color: Red
We only ship to Ebay Address,Please Make sure it's 100% right.
when your payment is clear.
|
Country |
DELIVERY TIME |
|||||
|
Shipping time will be longer than below period due to the flight and holiday |
||||||
|
WORKING DAYS |
5-7 |
8-10 |
12-14 |
15-19 |
20-22 |
|
|
WORKINGDAYS+SATURDAY+SUNDAY |
5-9 |
8-15 |
16-20 |
21-25 |
26-30 |
|
|
Australia |
Rate(time arrived) |
21.4% |
52.1% |
14.3% |
7.2% |
4% |
|
United States |
Rate(time arrived) |
5.2% |
80% |
14.3% |
0.5% |
|
|
United Kingdom |
Rate(time arrived) |
9.9% |
63.2% |
19.1% |
3.4% |
4.4% |
|
Germany |
Rate(time arrived) |
11.1% |
22.2% |
30.3% |
20.9% |
15.5% |
|
Canada |
Rate(time arrived) |
2% |
45.1% |
31.4% |
17.6% |
4% |
|
Italy,Russia |
Rate(time arrived) |
2.5% |
10.2 |
18.2% |
17.3% |
31.3% |
|
Spain |
Rate(time arrived) |
3.5% |
25% |
47.9% |
12.9% |
10.7% |
|
Brazil , most of the south America country |
Rate(time arrived) |
Most package will need 4-8 weeks |
||||
|
Other country |
Rate(time arrived) |
0.5% |
8.6% |
15.0% |
43.8% |
28.1% |
- Please buy with confidence. We specialize in electronic components for more than 10 years. All items will be tested before shipped.
- We are responsible for mail lost ,We promise you can get the items you pay or refund.All package need to wait 30 days(To USA, Only need 15days) , Please take care it.Less than 30 days
- We recommend tracking number . For orders more than $25. we provide free tracking number. Orders less than $25, customer can pay $3.0 for tracking number Pleas feel free to contact us if you need.
- we can accept 14days no-question-return.If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back..
- We greatly appreciate your POSITIVE feedback.
Here you can find items with high quality and best price .
\all items will be tested before shipped. Good quality is the basic of business. we seek for long term .We mainly selling ICs, electronic component ,
electronic modules.PCB board etc
ICs,
ICs business is our basic business. We specialized in ICs for nearly 10 years.
Located in HQB electronic market in SHENZHEN China. We stock ICs ourselves. We are not trader. So you can always find a good price here ,
For Big quantity, please send message to us to get a better price .
Electronic module.
We product modules . work with many big factory directly . they are all big factory , they have QC department, have strict control on quality ,
unlike the many small factory always selling modules without tested. So we can make sure every module you buy here is with high quality. Of course.
Best price too . For Big quantity, please send message to us to get a better price .
We also accept OEM or ODM order . if you need to design an module. Please feel free to contact us .
PCB boards
We product module . so work with big PCB factory .
Quality is really good , and price also low price,
Please don’t hesitate to send us message for a quote, then you will find we are the right business partner you are
looking for . .
Am 15.08.18 hat der Verkäufer die folgenden Angaben hinzugefügt: