Main Features:
Perfect for cooling your outdoor living areas. Can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog. No air assistance is required, the system is simple, the spray point is fine, the atomization is sufficient, energy and water saving, low cost and fine effect.
Scope of application: Wetting and descaling, air humidification, chemical treatments, chemical spraying, liquid spraying, tobacco leaf humidification, tablet coating, flue gas evaporative cooling, sterilization, component cooling, fruit spray Wax, tile glazing, plant humidification, salt spray test, artificial fog, humidification in other places, etc.
Description:
Sprayer Type: Pump
Type: Sprayers
Material: Plastic
Plastic Type: ABS
Model Number: LP-V03
Product Name: 12V water pump misting kit
Nozzle Size: Default 0.3mm
Function: Humidity, Stop dust, Cooling, Landscaping
Application: Cooling, Humidification and Garden Micro irrigation
Hose Material: Food Grade PE
Tubing size: 1/4''(6.35mm)
Pump Liter: 5L/min
Power: 12V 60W
Structure: Diaphragm Pump
Working Pressure: 0.8Mpa
Sprayer Type: Pump
Type: Sprayers
Material: Plastic
Plastic Type: ABS
Model Number: LP-V03
Product Name: 12V water pump misting kit
Nozzle Size: Default 0.3mm
Function: Humidity, Stop dust, Cooling, Landscaping
Application: Cooling, Humidification and Garden Micro irrigation
Hose Material: Food Grade PE
Tubing size: 1/4''(6.35mm)
Pump Liter: 5L/min
Power: 12V 60W
Structure: Diaphragm Pump
Working Pressure: 0.8Mpa
Package Includes:
1 x Micro Diaphragm Pump
1 x Power supply
1 x 12M misting system
2 x White female connector
16 x Mist nozzles
1 x End plug
1 x Inlet filter head
40 Saddle clamps
40 cable ties
1Roll x Seal tape
1 x Micro Diaphragm Pump
1 x Power supply
1 x 12M misting system
2 x White female connector
16 x Mist nozzles
1 x End plug
1 x Inlet filter head
40 Saddle clamps
40 cable ties
1Roll x Seal tape
Installation steps:
1.Take the 3M water hose and water inlet filter and put the filter into the water tank totaly .
2.Fit Misting Nozzles and end plug with Nozzle Fittings.
3.Take the black pump,Connecting one side with 3M water inlet and another side with 12M misting system.
4.Connect power adapter with pump and turn on the power to operate the system for 1 Minute to discharge the air in.
5.Check the whole system carefully to ensure there is no water leakage after the system start to work.
6.Fix the misting lines by the cable ties and saddie clamps provided.
7.Turn on the power and then enjoy the misting cooling system.
Note:Water leakage proof tape is recommended if found anywhere with water leaking.
1.Take the 3M water hose and water inlet filter and put the filter into the water tank totaly .
2.Fit Misting Nozzles and end plug with Nozzle Fittings.
3.Take the black pump,Connecting one side with 3M water inlet and another side with 12M misting system.
4.Connect power adapter with pump and turn on the power to operate the system for 1 Minute to discharge the air in.
5.Check the whole system carefully to ensure there is no water leakage after the system start to work.
6.Fix the misting lines by the cable ties and saddie clamps provided.
7.Turn on the power and then enjoy the misting cooling system.
Note:Water leakage proof tape is recommended if found anywhere with water leaking.
