18650 Lithium Battery Boost Module Charge Discharge UPS Protection Charging Board SMD Battery Box 5V/12V
Module Advantages:The
module can charge and discharge at the same time. It is not easy to
generate heat and safe to use. The battery panel comes with overcharge,
over-discharge, and over-current protection. The battery cannot be
reversely connection.
Specifications:- Module size:
* 89 x 22 x 22.4mm(SMD Battery Box)
* 89 x 22 x 38.5mm(Normal Battery Box)
- The module mounting hole diameter is 3mm
- Input: DC5V
- Output 5V: The maximum current is 1A (the charging power supply should be greater than the current output capacity of 1A).
- Output 9V: current maximum 500mA (charging power supply should be greater than 1A current output capacity).
- Output 12V: Maximum current 350mA (charging power supply should be greater than 1A current output capacity).
-
Load: The output positive and negative poles are connected to the load,
the normal load is recommended to be <5W, and the transient state is
<8W.
Product Size:![](https://www.thanksbuyer.com/image/catalog/68501/68501-01.PNG)
Attention:
If it enters the protection state after a short circuit by mistake, it
will not output (lithium battery overcharge protection, over-discharge
protection, current limit protection, over-temperature protection,
output short-circuit protection). After connecting to 5V charging, it
will automatically activate and re-output.
Precautions: There
are MOS and other components on the board, which are easily damaged by
induction or static electricity of your soldering iron. Please ensure
that the soldering iron used is grounded (and the ground wire is
connected), and it is best to wear electrostatic gloves.
Main Functions:1) Lithium battery charging
2) Lithium battery protection (short-circuit protection, over-voltage protection, under-voltage protection)
3) Boost output 5V/12V, OPTIONAL
4) At the same time equipped with universal Micro USB charging interface, direct DC5V input to charge lithium battery
5)
Two-color LED indicates charging status, green light is always on when
it is charged fully, and the charging is automatically stopped.
6) The module is equipped with high quality 18650 battery holders, namely normal and SMD types
7)
UPS power failure uninterruptible power supply function.When the power
supply is powered, the load is directly supplied by the power supply via
the boost circuit.Once the power is turned off, the battery path is
automatically activated to power the load via the boost circuit.After
the power is provided again, the power is restored from the power supply
and the battery is also charged.
Booster Board:The
boost section uses switches to control its operation and shutdown, and
can also be directly shorted by jumper pads. (The switch needs to be
equipped separately)
1. When using as a UPS, the UPS output switch
should be shorted, and the output should be turned on in real time. When
the power is off, the battery can be powered at any time.
2. As a
mobile power supply, it can be connected to the UPS output switch
interface. It is turned off when not in use. There is no static loss and
it is very energy-saving.
3. If the UPS output switch interface does
not need to be connected to the switch, it can also be shorted, and the
output indicator light is soldered after all the tests are completed.
This can reduce the current consumption of 10mA-20mA without affecting
the normal output of the circuit, and save power. .
4. During the
operation, it is possible that the board will enter the protection state
and not output due to various reasons (mistakes, misconnections, etc.).
After the problem is removed, the board charging port can be connected
to the 5V charging, and the board is re-powered. The re-output can be
activated.
5. The 5V charging power supply used by individual users
internally uses a large capacitance output capacitor. This capacitor can
continue to discharge after the power is cut off, so that the power
supply voltage has a slow down process, which will cause the power
supply to turn off the board. Did not switch battery power quickly. If
you encounter such a situation, you can connect a 1K discharge resistor
to the 5V input port.
Product Usage:1) Can be used for single battery power supply, your battery can be replaced at any time.
2)
Suitable for uninterrupted power supply solutions such as low-power DC
equipment and meters. It starts automatically when the power is off, and
automatically charges when the power comes in.
3) Not limited to UPS
function, it can be expanded for multiple purposes. Fully charged can
be used as a low-power mobile power supply, and can be used as a
temporary emergency charger for lithium batteries.
Package Included:- 1 x Set of Battery Box Charging Board
Note: Battery is not included.![](https://www.thanksbuyer.com/image/catalog/68501/68501-01.jpg)
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
-
For remote regions, we will charge your extra shipping costs. Usually
it cost about 35USD-50USD. We will contact you after your payment.
Thanks for your understanding.
Return Terms
1.
If you receive defective item, please kindly notify us within 14 days.
We will guide you the returning instruction for replacement or refund.
2.
If you purchased in improper condition, please NOTE that the sipping
and handling fee will not be refund, all return shipping fee should paid
by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1.
Import duties, taxes, and charges are not included in the item price or
postage cost. These charges are the buyer's responsibility.
2.
Avoiding some unnecessary trouble, please check with your country's
customs office to inform us what we should declare its value before
shipping.
Feedback
1.
If you are dissatisfied for any reason, please don't be quick to leave
us neutral or negative feedback. We work hard to make sure EVERY
CUSTOMER 100% SATISFIED and resolve any problem for you and always leave
positive feedback to all our customers.
2. If you are satisfied with
the product you received, please kindly leave us a positive feedback
and 5 star DSR. If there is any problem of your order, please feel free
to contact us firstly, we are responsible and credible seller, will
follow it for you asap.