Notes:
Not all options include a soldering pen, depending on which option you choose, please double check before placing your order.
Description:
Product Name: Pen type soldering iron (Wireless & Portable)
Filling capacity: 8ML
Tank material: ABS plastic
Temperature: flame temperature 1300 ° C soldering iron temperature 450 ° C
Use fuel: pure butane, gas
Usage time: 8ML version about 35-45 minutes
1. It is multi-function welding tool of gas iron, can be used separately or replace other soldering iron head. Its tempertature up to 450°C.
2. Reusable and inflatable use
3. Adjustable flame
Specifications:
1. Loose rusted metal screws, laboratory heating research, kitchen baking, equipment maintenance.
2. Car repair welding, aviation equipment repair, hydropower engineering equipment maintenance.
3. Electrical appliances, motor control box repair welding, etc.
4. Circuit board repair welding, IC board welding repair, indoor and outdoor line welding.
5. Electronic components on the tin, welding, etc.!
Filling with gas
1、Fill with gas and make sure the switch is closed at OFF before refilling.
2、Introduce the gas canister into the inlet hole and press down to fill.
3, about 10 seconds, can be completed filling gas, wait a few minutes, wait for the gas to stabilize, then use again.
4、If there is a hissing sound at the end of the gas filling, use the tip of the pen to slightly press the air inlet to eliminate it.
Ignition
1, replace the iron head
2, push the switch to ON place, hear "hiss" sound.
3, push the electronic switch can be ignited.
4, light the fire after burning 3 minutes, to be extinguished to reduce the fire, the iron head will continue to heat.
5, adjust the flame size;
6, the temperature of this product up to 1300 degrees (iron temperature 450 degrees), use need to pay attention to safety, after using the switch off to OFF position.
7, the use of gas soldering iron, please pay special attention to wait until the flame is completely eliminated, the soldering iron within the object becomes red, and then operate, in order to extend the life of the soldering iron head.
Attention:
1、Replace the connector, please wait until it cools down and then replace it or change it beforehand.
2, the use of the soldering iron head, high temperature and hot, please do not touch with your hands.
3、Adjustment knob can control the amount of gas and temperature, usually placed in the middle position.
4、After use, wait until it cools down, then collect it, do not put it in high temperature or direct sunlight.
5. Children should not use it, and it should be stored in a proper place.
6、Please use high quality canned gas for filling, and keep away from fire source when filling.
7、Because the gas may have some residue, it is necessary to clean the nozzle frequently.
When cleaning, press the nozzle against the gas tank outlet to clean it.
Avoid dropping it.
