1. Adjust the outdoor temperature link channel of clock and outdoor sensor to be same，like A-A, B-B, C-C.
2. Install batteries (3xAAA for clock and 2xAA for outdoor sensor) and choose your time zone.
3. Outdoor temperature starts to connect first, once finished, clock starts to search for WWVB signal.
4. Put clock to a place with good signal for better reception and outdoor sensor to a safe place outside within 330feet/100m.
5. Clock updates time automatically when signal received successfully.
Tips:
In most areas, a signal can only be received at night. If your clock does not receive WWVB signal in daytime, please wait overnight and it will be set in the morning.
Outdoor temperature range: -40℉ ~ 158℉ (-40°C to 70°C). Indoor temperature range: 32℉ ~ 122℉ (0°C to 50°C). When clicking to change the temp display unit, indoor and outdoor will change simultaneously. The outdoor sensor should be placed within 300ft/100m and out of direct sun light or rain.
This atomic is a wall clock and table clock. There are hangging holes on the clock back, you can hang it on wall easily. There is also a folding stan on the back, so it can also be used as a desk clock.
After installing batteries, my clock is not showing the outside temp, how to make it work?
Select any one of the ABC channels on the clock and set the channel of the sensor to be the same. The outdoor temperature will be displayed within 3 minutes.
Does it light up in the dark?
No, it doesn’t have a backlight feature.
What time zone does it support?
4 U.S time zones (EST, CST, MST, PST ).
How to correct the wrong day of week?
Set the correct date and year then day of week will be corrected automatically.
Is the outdoor sensor waterproof?
It's waterproof, but for a longer service life, we recommend that you do not expose the sensor to direct rain or sunlight.