PACKAGE CONTENT : ( NOT include Raspberry Pi board.)
3.52inch e-Paper HAT x1
PH2.0 20cm 8Pin x1
Screws pack x1
WIKI English manual:
waveshare.com/wiki/3.52inch_e-Paper_HAT
Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity
Ideal for price tags, shelf labels, industrial instruments...
Size3.52″
Resolution360×240
Viewing Angle>170°
Display ColorBlack/White
Grey Scale2
CommunicationSPI
Display PanelE-paper
ExperiencePaper-like
EnvironmentAmbient Light Required
Display TypePassively Reflective
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/STM32, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
WIKI manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)
OPERATING VOLTAGE | 3.3V/5V | DISPLAY COLOR | Black/White |
INTERFACE | 3-wire SPI, 4-wire SPI | GREY SCALE | 2 |
OUTLINE DIMENSIONS | 86.5 × 57mm | FULL REFRESH TIME | 1.5s |
DISPLAY SIZE | 74.51 × 49.67mm | REFRESH POWER | <25mW (typ.) |
DOT PITCH | 0.207 × 0.207mm | STANDBY CURRENT | <0.01uA (almost none) |
RESOLUTION | 360×240 pixels | VIEWING ANGLE | >170° |
Similar To The Size Of Raspberry Pi, Compatible With The Size Of Raspberry Pi 4B / 3B / 3B+
For Use With Controller Boards Like Raspberry Pi/STM32/Arduino
VCC | Power (3.3V / 5V input) |
GND | Ground |
DIN | SPI MOSI pin |
CLK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | External reset, low active |
BUSY | Busy status output pin |
Compatible With 3.3V / 5V MCUs
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...