PACKAGE CONTENT :( NOT include Raspberry Pi board.)
2.13inch e-Paper HAT (G) x1
PH2.0 20cm 8Pin x1
WIKI English manual:
waveshare.com/wiki/2.13inch_e-Paper_HAT_(G)
Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity
Ideal for price tags, shelf labels, industrial instruments...
Size2.13″
Resolution250×122
Viewing Angle>170°
Display ColorRed/Yellow/Black/White
Grey Scale2
CommunicationSPI
Display PanelE-paper
ExperiencePaper-like
EnvironmentAmbient Light Required
Display TypePassively Reflective
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs
WIKI manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
OPERATING VOLTAGE | 3.3V/5V | DISPLAY COLOR | Red/Yellow/Black/White |
INTERFACE | 3-wire SPI, 4-wire SPI | GREY SCALE | 2 |
OUTLINE DIMENSIONS | 65 × 30.2mm | FULL REFRESH TIME | 25s |
DISPLAY SIZE | 48.55 × 23.70mm | REFRESH POWER | 26.4mW (typ.) |
DOT PITCH | 0.1943 × 0.1942mm | STANDBY CURRENT | <0.01uA (almost none) |
RESOLUTION | 250 × 122 pixels | VIEWING ANGLE | >170° |
Compatible With Raspberry Pi Series Boards, Jetson Nano
For Use With Controller Boards Like Arduino/STM32
VCC | Power (3.3V / 5V input) |
GND | Ground |
DIN | SPI MOSI pin |
SCLK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | External reset, low active |
BUSY | Busy status output pin |
Compatible With 3.3V / 5V MCUs
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...