Car Body Paintless Dent Repair Tool Set T Dent Puller Auto Repair Sheet Metal Kit
Feature:
1.SLIDE HAMMER - The slide hammer T-shaped rod puller tool adopts a lever type design, suitable for metal panel dent repair engineering, and can also be decomposed into two different T-shaped rods, cleverly used in two ways.
2. EASY To OPERATE - The puller kit is suitable for anyone to use. It can repair various dents, and the dent repair elevator can also be adjusted according to the size of the dents.
3. WIDELY USED - Can be widely used, such as in cars, motorcycles, refrigerators, and washing machines. It can also protect the original paint and effectively and quickly remove dents.
2. EASY To OPERATE - The puller kit is suitable for anyone to use. It can repair various dents, and the dent repair elevator can also be adjusted according to the size of the dents.
3. WIDELY USED - Can be widely used, such as in cars, motorcycles, refrigerators, and washing machines. It can also protect the original paint and effectively and quickly remove dents.
4. HIGH QUALITY-Newly designed T bar puller are made of stainless steel. They are durable and corrosion resistant, with high quality guarantee and easy to store. Anyone can handle the removal of dents, easy to use.
How to use:
1. Clean the dents with a clean damp cloth;
2. Install the glue stick onto the glue gun, pull the trigger to allow the glue stick to enter the glue gun (not included), connect the power supply, and preheat for 5 minutes;
3. Use suitable stretching washers. Large dents require large drawing seals.
4. Pull the trigger and apply the wire drawing gasket with extruded adhesive;
5. Place the quick pull gasket in the center of the dent coated with hot melt adhesive and gently press until the adhesive solidifies and adheres;
6. Align the T-shaped retainer and use hot melt adhesive to compress the pull wire gasket, then pull the sliding rod backwards to pull it into the thread;
7. Control with a line card. If the dents still exist, strike with a straight hammer or pencil;
8. Clean the repair area with a clean damp cloth.
1. Clean the dents with a clean damp cloth;
2. Install the glue stick onto the glue gun, pull the trigger to allow the glue stick to enter the glue gun (not included), connect the power supply, and preheat for 5 minutes;
3. Use suitable stretching washers. Large dents require large drawing seals.
4. Pull the trigger and apply the wire drawing gasket with extruded adhesive;
5. Place the quick pull gasket in the center of the dent coated with hot melt adhesive and gently press until the adhesive solidifies and adheres;
6. Align the T-shaped retainer and use hot melt adhesive to compress the pull wire gasket, then pull the sliding rod backwards to pull it into the thread;
7. Control with a line card. If the dents still exist, strike with a straight hammer or pencil;
8. Clean the repair area with a clean damp cloth.
Package included:
1x Slide hammer tool
18x Blue gasket
3x Black glue stick
1x Yellow plastic shovel
1x50ml Spray bottle
1x Cleaning cloth
1x Slide hammer tool
18x Blue gasket
3x Black glue stick
1x Yellow plastic shovel
1x50ml Spray bottle
1x Cleaning cloth
Note: Does not include glue gun and glue, please purchase separately if needed.
