Model:A-E010

Drainage method: automatic

Air handling capacity: 100NL/Min, 3.5scfm

Drainage pipe diameter: 6mm

Maximum pressure: 1.0MPA

Working pressure: 0.8MPA

Rated power: 220W

Power supply voltage: 220V, 50HZ

Intake air temperature: ≤40℃

Temperature environment: ≤35℃

Air intake diameter:G1/4"

Air outlet diameter: G1/4"

Product size:150*135*195MM

Dew point pressure: ≤10°C

Model:A-E026

Drainage method: automatic

Air handling capacity: 260NL/Min, 9.1scfm

Drainage pipe diameter: 6mm

Maximum pressure: 1.0MPA

Working pressure: 0.8MPA

Rated power: 260W

Power supply voltage: 220V, 50HZ

Intake air temperature: ≤40℃

Temperature environment: ≤35℃

Air intake diameter:G1/4"

Air outlet diameter: G1/4"

Product size:285*175*185MM

Dew point pressure: ≤10°C

Installation Precautions:

1. The air intake and exhaust of the cooling vents must not be covered.

2. There must be no heating equipment in the surrounding supporting equipment, otherwise it will cause performance degradation.

3. The installation conditions need to be level, and the supporting equipment must be installed without vibration.

4. Strictly follow the instructions on the dryer panel for installation.

5. The installation and use environment temperature is 0-35℃. Excessive temperature will affect its performance.

6. The connected air inlet pressure shall not exceed 0.8MPA.

7. The inlet air temperature is controlled below 45°C.

8. A pneumatic filter is required for the air intake.

9. Turn on the power for about 5-10 minutes for optimal cooling.

10. The drainage time can be adjusted freely according to the working conditions.

11. The shutdown process can be directly shut down.