Notice: replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepair it by yourself .Keep in mind that you must add oil on the gear beofore use !!!
Über die Zertifizierung:
Wir können nur CE-Zertifizierung, es gibt keine andere Zertifizierung zur Verfügung gestellt werden, danke für Ihr Verständnis.
Dimensio:
Overall length 1040mm(40.9 in)
Overall width 872mm(34.3 in)
Overall height 332mm(13.1 in)
Transom height 44CM(17.3 in)
Performanc:
Full throttle operating range 5000-6000r/min
Maximum output:6HP
Idling speed ( in neutral) 1000±100 r/min
Engine:
Gear positions Forward-neutral-reverse
Gear ratio 2.15(28/13)
Trim and tilt system: Manual tilt
Drive uni
Recommended fuel Regular unleaded gasoline
Integral fuel tank capacity 2.5L
Recommended engine oil 2-stroke outboard motor oil
Engine oil type Genuine or recommended 2str engine oil
Lubrication System Engine oil mixed gasoline
Engine oil mixing ratio Fuel 50: Engine oil 1
Gear oil quantity 195ml(6.6 fl.oz.)
Tightening torque for engine
Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m)
Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)
About certification:
We can only provide CE certification, no other certification can be provided, thank you for your understanding.
Please note
1. About noise: All gasoline engines are very noisy. At present, we have not tested decibels, but the noise is the same as that of motorcycles, so this is normal.
2. The machine itself is light in weight and can be used on board no more than 100kg, with a load of 4 people, but the speed is definitely different when people or 4 people. Please pay attention to customers who have high expectations for speed.
3. Can march with inflatable boats, rubber boats or fishing boats.
4. Necessary: You must prepare a boat motor bracket or hanging plate on board.
Two strokes of 2.5 horsepower are controlled by the handle and the handle is operated by the clutch. No neutral, only idle mode or low speed mode
Strictly for professionals only
Please note:
We do not provide consumables for free (such as pulling the starter).
If you want to buy, please contact us
Short axis: 672MM
description:
Full throttle operating range: 4000-5000r / min
Maximum output power: 2.5HP
Speed: 10 km/h
Type: 2 strokes
Ignition System: CDI System
Start the system: manually start
Staring at the carburetor system: choke start
Engine and propeller ratio: 2:1
Recommended fuel: ordinary unleaded gasoline
Fuel ratio: 25:1 (please note this version and ignore the manual on this)
Gear ratio: 27/13
Top speed: 10 km / hour
Built-in fuel tank: 1L
Fuel consumption per hour: 1.5 liters
notice
After cruising in sea water or drowning
1. Use fresh water to clean the outboard motor
2. Circulate the engine at moderate speed .
3. Do not leave the outboard motor outside until you have completely cooled the water. Otherwise the water can enters the cylinder through the exhaust port.
From there it will cause an engine failure.
4. The engine should be stored in a dry and ventilated place to avoid direct exposure to the sun.
5. You should use up the gasoline in the tank before long-term storage.
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
Technical Parameters
Short shaft: 40cm
Dimension
Overall length 1040mm(40.9 in)
Overall width 872mm(34.3 in)
Overall height 332mm(13.1 in)
Transom height 44CM(17.3 in)
Performance
Full throttle operating range 5000-6000r/min
Maximum output 7HP
Idling speed ( in neutral) 1000±100 r/min
Engine
Gear positions Forward-neutral-reverse
Gear ratio 2.15(28/13)
Trim and tilt system: Manual tilt
Drive unit
Recommended fuel Regular unleaded gasoline
Integral fuel tank capacity 2.5L
Recommended engine oil 2-stroke outboard motor oil
Engine oil type Genuine or recommended 2str engine oil
Lubrication System Engine oil mixed gasoline
Engine oil mixing ratio Fuel 50: Engine oil 1
Gear oil quantity 195ml(6.6 fl.oz.)
Tightening torque for engine
Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m)
Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)
Notice: Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10hours). (if you do not know how to handle this, please contact with us )
About certification:
We can only provide CE certification, there is no other certification can be provided,thanks for your understanding.
Pay Attention
1.About the noise: all the gasoline machines are noisy, currently we did not test the decibel , but the noise is the same as the motorcycle, so it is a normal phenomenon.
2.The machine itself is lightweight, it can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same whenone person on it or 4 people on it . Customer who has high expectations on speed, please be noticed.
3.It can be marched with inflatable boats, rubber boats or fishing boats.
4.Necessary: you have to prepare a boat-motor stand or Hanging board on your boat.
Two strokes 3.5 hp are controlled by the handle, which is operated by the clutch. There is no Neutral, only idle mode or low speed mode
STRICTLY FOR PROFESSIONAL USE ONLY
Please Note:
There are two pull starter included in the parcel(one is the machine, another one for spare)
We don't supply wearing parts (pull starter)for free.
If you want buy one please contact us
Short Shaft:40cm
Description:
Overall length:92CM
Overall wideth:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/min
Maximum output:2.5kw(3.5HP)
Speed:10km/h
Type:2-stroke
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 25:1 (Please be suject to this version, and disregard the manual about this point)
Gear ratio: 27/13
Maximum speed: 10 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L
Announcements
After in the sea water or turbid water cruising
1.Use the fresh water cleaning the outboard motor
2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder,
from that will cause the engine breakdown.
4.The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.
5.Before the long term storing,you should run out of the gasoline in the fuel tank.