Note:
1. The radiator cap that has not passed the test can’t release the pressure when it reaches the pressure value.
2. The damaged thermostat is unable to carry out a large cycle, resulting in a continuous increase in the radiator pressure.
3. The radiator fan does not turn, resulting in high temperature in the water tank.
4. Drain the air from the cooling system. Refer to the user manual or repair manual.
5. Please refer to owner's manual to add coolant.
6. Do not open the hood until the steam has subsided. The engine compartment may be very hot, causing serious injuries such as burns.
7. Please stop the vehicle immediately, when “ENGINE OVERHEAT/High Temperature” shows on the dashboard or steam comes out from under the hood.
8. Keep hands and clothing (especially a tie, a scarf) away from the fans and belts. Failure to do so may cause the hands or clothing to be caught, resulting in serious injuries.
9. Do not loosen the radiator cap while the engine and radiator are hot. Serious injuries, such as burns, may result from hot coolant and steam released under pressure.
 
Features:
Enhancements added to solve original design failures and to improve the life of high mileage vehicles
Drop in fit, form and function for hassle-free installation
All necessary hardware or fittings are included in each unit
100% Leak Tested
Premium grade tubes, fins, headers, tanks, and other components
Components are fitted and torqued in place to factory specifications
 
Details:
Core Material: Aluminum
Tank Material: Plastic
Core Dimension: 27'' x 17.72''
Inlet Diameter: 1.38''
Outlet Diameter: 1.38''
Row:  1
Oil Cooler:  Included

Type of Transmission:  AT / MT

Interchange Part Number:  Q2215, CU2215, RAD2215, DPI2215, 8012215, 2996, 2213400, 214609Z000, 2215, 9850, 431516, 9849, 214603S600, 214103S200

 

Radiator Cap: Not included

The Dimension of the Radiator Cap should be: 43mm (Outer diameter) x 16.5mm (Depth).

The pressure value of the new cap should be the same as the old radiator cap.
 
Fitment:
For 1998 - 2004 For nissan Frontier 2.4L & 3.3L
For 2006 - 2008 For nissan Frontier 2.4L Only (Not for 2.5L & 4.0L)
For 2011 - 2015 For nissan Frontier 2.4L Only (Not for 2.5L & 4.0L)
For 2000 - 2004 For nissan Xterra 2.4L & 3.3L
 
Package:
1pc of brand new radiator
 
Warranty:
30 days free return and exchange
5 years warranty

 

How to clean radiator:
1. Start the vehicle, to rise to normal temperature. Slowly open the tank cover, the fluid shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, flush water tank, until out of clear water, suitable for any water cycle system.
2. After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification.

 

How to replace the radiator:
1. Disconnect the battery.
2. Drain the radiator fluid into a suitable container.
3. Remove the old radiator:
-Take off any plastic covers around the radiator.
-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.
-Disconnect the radiator hoses from the radiator.
-Disconnect the transmission cooling lines from the bottom of the radiator.
-Remove any clamps, brackets, or screws holding the radiator inside its frame.
-Lift the radiator up and out of the car.
4. Install the new radiator:
-Slide the new radiator into place.
-Connect any clamps or brackets that hold the radiator in place.
-Connect the transmission cooling lines carefully.
-Connect the engine cooling hoses to the radiator.
-Replace the fan and fan shroud.
-Reconnect the fan electrical connection.
-Replace the plastic covers.
5. Fill the radiator with fluid.
6. Check your work to make sure that there are no leaks.
(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)
Note: Do please keep children and pets away when replacing the radiator)