Latest V9 version Malachite radio dual antenna latest version 1.10D Malahit-DSP1 stereo SDR receiver 50kHz to 250MHz, 400MHz to 2GHz
Features:
1. [Appearance design] Adopting the golden ratio CNC aluminum shell integrated cutting process, fine sand spraying and oxidation, the appearance is exquisite and more textured, the aluminum knob is full of mechanical feeling
2. [Product Details] It supports dual antenna input 1.10D receiver, optimized filters and circuits, especially the medium wave part, performance has been improved to a certain extent, attenuated to 30db, high resistance input, improved shortwave sensitivity, there will be better and more stable signal.
3. [Register 1.10D firmware, support 2G] The receiving frequency is 50kHz to 250MHz, 400MHz to 2GHz. If you want to achieve better results when receiving shortwave frequency range M, MW, USB, LSB, SSB, it is recommended to use a small ring active outdoor antenna with a frequency of 0.1HZ-30MHZ
4. [High battery life] Built-in 5000Mah 3.7V rechargeable battery, USB type C interface, long-lasting battery life, once fully charged, it can be used for 15 hours, and it is very safe to use.
5. You can connect to a computer via USB, or you can control the receiver with a computer. The specific operating instructions are described in detail.
6. With variable filter width, adaptive noise suppressor, threshold noise suppressor, noise suppressor, AGC, equalizer and other functions.
7. [Enhanced screen] It increases the brightness of the screen, which is appropriately higher than the conventional screens on the market. You can see more clearly and comfortably in the sun.
Product parameter introduction:
1) The radio is built on SDR principles and functionality is determined by the loaded software.
2) Frequency range 50 kHz to 250 MH and 400 MHz to 2 GHz
3) All types of analog modulation: AM, SSB (LSB USB), CW, NFM, WFM,
4) Powerful functions: variable filter width, adaptive noise suppressor, threshold noise suppressor,
Noise Blanker(AGC_EQ.
5) Use the fully functional chip msi001
6) The powerful stm32h743 clocked at 480 MHz is applied.
7) 3.5-inch IPS display with touch screen.
8) There is a built-in UHF.
9) Controls 2 encoders with buttons and touch screen.
10) The power supply is powered by an external TYPE-C (Huawei mobile phone) interface and can be charged by TYPE-C. The internal battery voltage is 3.7V and the capacity is 5000mAH.
11) The current consumption when listening to headphones is 300mA.
12) Built-in receiving module To improve HF reception on the antenna, an add-on board with a source follower was developed. The board will be built into a standard receiver design.
13) Connected to computer via USB, CAT, IQ and audio can be transferred.
14 192kHz span for scalability.
15) Sensitivity - 0.3μV= 10dB at s/w up to 1GHz.
16) Due to the characteristics of the msi001 chip used, the dynamic blocking range is approximately 85dB.
17) There is backlight control.
18) SMA female antenna socket;
19) Using temperature compensated crystal oscillator, the frequency stability is as high as 1ppm
20) Dynamic up to 82db
21) Length of telescopic antenna: 0.75 meters
22) Overall dimensions 140X94X30mm (excluding protrusions)
Software features:
Adjustable filter width
Adaptive Noise Reduction (NR)
Threshold noise reduction
Noise canceller(NB)
Automatic Gain Control (AGC)
Automatic Notch Filter (ANF)
Stereo FM supports RDS simulated stereo
Equalizer
Package Included:
1 x host
1 x telescopic antenna
1 x touch pen
1 x stand
1 x traceless glue
1 x TYPE-C data cable
1 x eva storage bag
1 x lanyard
1 x 3M transparent foot pad
1 x English instruction manual
