Feature:

1. Accurate and digital temperature control, displays required temperature and current temperature, convneient to use.
2. Removable water reservoir for easy cleaning, suitable for professional beauty salons and SPA center use.
3. Including 27pcs massage stones of the package, good using effect to relieve fatigue, relax nerves, beauty and skin care, healthy care.
4. Applicable for SPA clubs, business hotels, beauty salons, beauty centers and so on to meet different demands.
5. Each massage stone is repeatedly polished to achieve smoothly and delicate edges, excellence texture for safe use.

Specification:

Item Type: Massage Stone + Heater
Material: Enamel coated steel + powder coated steel + Graystone

Plug: EU Plug 250V

 

Massage Stone Size: Approx. 
11 x 7 x 3cm / 4.3 x 2.8 x 1.2in XL Stone x 1pc 
7.5 x 5.5 x 2.75cm / 3 x 2.2 x 1.1in L Stone x 6pc 
6.5 x 4.5 x 1.75cm / 2.6 x 1.8 x 0.7in M Stone (Hand and arm) x 8pc 
3.75 x 3 x 1.75cm / 1.5 x 1.2 x 0.7in S Stone (Forehead, neck and face) x 10pc 
8 x 3 x 1.75cm / 3.1 x 1.2 x 0.7in Deep Tissue Stone x 2pcs

Heating Pot Size: Approx. 44.5 x 31 x 23.5cm / 17.5 x 12.2 x 9.3in

Efficacy: Relieve fatigue, relax nerves, beauty and skin care, healthy care
Applicable Scenarios: SPA clubs, business hotels, beauty salons, beauty centers

How to use the heating pot:

Important explanation: In order to achieve a uniform temperature, it is important to start with the water as close to your set temperature as possible. This prevents the temperature difference
1. All stones must be cleaned before use
2. Fill the water tank with hot water and let it stand for 2-3 minutes. Put the stones in a bowl and cover with hot water. Wait 3-4 minutes. These processes can prevent stone or water reservoirs from having a strong cooling effect on the water you added in step 4.
3. Pour out the water in the reservoir. Put a towel at the bottom of the reservoir. This is important to protect the enamel of the reservoir from shedding.
4. Put the stones on the towel in the reservoir. Add hot water. The temperature of most tap water is between 49°C and 60°C. Before you turn on the heater, you need to check the water temperature with a thermometer. If the temperature of the water is higher than the temperature you require, add a little cold water (stir it with the handle of the spoon to make it mix thoroughly) until it is the same temperature or slightly lower than the temperature you require. If the temperature is low, add hot water. Turn on the heating. When the green light turns on, you need to wait at least 10-15 minutes
Let the heat penetrate into the center of the stone (it will take 20 minutes if you use a larger stone). If you find that your stone is cooling too fast, allow a longer time. Avoid using water temperature than the set temperature for equipment insulation which may take longer to cool to the set temperature (causing a delay when the green light will indicate that the heater can use), than needed if the water is taken from or slightly below the set temperature.
5. Plug the power cord into a grounded socket
6. Press the power button to turn on the heater.
7. Press the plus or minus button to select the desired temperature. EU plug-in heaters are in Celsius, and the temperature will increase by 1 degree. Long press for 3 seconds, the temperature will increase by 5°C or 10°C. If there is no set temperature, after pressing the power button for 5 seconds, the heater will automatically start to work, heating to the lowest temperature of 40 ℃
8. When the heater is heating up, the "heating" indicator light between the temperature indicators is red. When the required temperature is reached, you will hear a sound and the LED will turn green. Even if the heating will cycle on and off to maintain the desired temperature, the heating indicator light will remain green.
9. When the required temperature is reached, you need to leave the stone for a period of time to ensure that the heat has penetrated into the center of the stone. The larger the stone, the longer it will take.
10. When moving a stone with a shovel, touch the stone with your fingers and hold it in your hand to see if the temperature is warm.
11. When the hot stone phase is over, press the power button to turn off the heater
12. Unplug the heater from the wall socket.
13. If you do not unplug the power source, the water heater will automatically turn off after 6 hours.

Massage stone operation method
1. Preparation materials: Add pure water to the furnace, drop the essential oil, soak the hot stone in it, plug in the power supply and heat it for about 20 minutes (the temperature can be determined according to the customer's skin bearing capacity, generally not more than 70 degrees Celsius).Heat up the energy stone and put it on the towel.
2. Before going to the spa, go to the shower first. The skin with unobstructed pores can absorb the product better.You can also sit in the infrared light bath room for ten minutes. The infrared function of the capsule can help open pores and discharge the waste from metabolism in the body.
3. Essential oil massage: adjust the light to a soft state, and the masseur will apply the deployed essential oil to the whole body, massage along both sides of the spine from bottom to top with the technique of lymphatic detoxification to relax muscles and muscles
4. Hot stone massage: when the masseuse slides the hot stone through the skin with deep muscle massage, it helps to release pressure, accelerate deep liponysis and improve the metabolic rate
5. Enhance acupoint stimulation: the masseur places the hot stone with appropriate temperature on the acupoints on both sides of the spine on the back in order to let the heat-absorbed essential oil penetrate into the skin with the heat.Put certain pressure on the back acupoints for about 20 minutes. This step is conducted by the warmth of the energy stone, wake up the deep skin, activate cells, strengthen the blood circulation in the body, and stimulate and guide the natural nutrient supply of the human body.
6. Moisturize: After massage, you can apply some lotion with skin care, slim and plastic effect on the skin to further moisturize the skin, tighten pores, tighten the skin, and make the skin more smoothly, soft and elastic.
7. Purification: after the course of treatment, the energy stones need to be laid out to purify each other.

Note:
1. Pour appropriate amount of water into the energy stone heating pot and immerse all the hot stones in water;More than two thirds of the general water added;
2. The temperature of water is controlled at about 70℃;If the temperature exceeds 70℃, be sure to use heat insulation , take out the energy stone from the heating pot with a long handle wooden spoon, let the energy stone cool down slightly to the temperature suitable for the guests, and then put it on the body;
3. Special attention should be paid to avoid the protruding parts of the bones to prevent bruising
4. Before putting it on the body, be sure to scrub the water and hands left on the surface of the energy stone;
5. Before the energy stone massage, be sure to ask whether the temperature is appropriate;
6. In the process of massage, if necessary to adjust the temperature of the energy stone;
7. When doing body massage, minimize the sound of collision between energy stones to create a comfortable and comfortable environment
8. After the use of energy stone, the surface of the energy stone is coated with some essential oil, placed in a dry container, do not let the energy stone in the water overnight.

Maintenance method:
1. Turn off the power supply of the energy stone heating pot, put a towel on the massage table first, and then put the energy stone in the hot water on the towel;
2. Pour out all the water of the energy stone heating pot , then spray cleaning liquid in the heating pot, and then dry;
3. Put the energy stone in clean warm water, add water, wipe the energy stone clean and put it on a clean towel;
4. Apply a small amount of massage essential oil to the cleaned energy stone and put it in the clean energy stone heating pot. At this time do not turn on the power supply, placed in a dry place;

Note:

1. Read all the instructions before using the device

2. This equipment is only for family and indoor use.

3. The surface is easy to heat during use.

4. In order to prevent electric shock or other hazards, do not insert the heater or its wires or plugs into water or other liquids.

Turn off the heater first, then unplug the plug from the wall.

6. Close monitoring is required when heaters are used near children

7. Be sure to unplug the socket before not using or cleaning the appliance.Allow cooling prior to removal of parts and cleaning.

8. Do not use damaged cables or plugs to operate the heater.If the power cord is damaged, it must be replaced by the manufacturer, their service provider or similarly qualified personnel to avoid danger

9. Use of accessories not approved by the supplier may cause fire, electric shock or injury.

10. Do not use the equipment outdoors.

11. Do not let the cable contact the hot surface.

12. Do not place on or near gas, electric stove or oven.

13. Take extra care if moving appliances containing hot liquids

14. Do not use the equipment for any purpose other than this manual

15. Do not fill the reservoir beyond the indicated maximum water level.It's always in the same plane.

16. Add rocks to the reservoir before adding water

17. Do not use if you have rashes, cuts, burns, skin irritation, damage or sensitive skin.
18. Do not place the water heater in the sink or bathtub to fill with water when it is plugged into an electrical outlet.

19. Do not use the device if you feel sleepy or sleepy.

20. Use a slotted spoon or heat‑resistant glove to remove stones from the water.

21. Do not add boiling or very hot water to the tank.

22. Such an appliance may be used by persons with weak physical, sensory or mental abilities or with little experience and knowledge, provided that they have been supervised or instructed to use the appliance in a safe manner and are aware of the hazards involved.Children are not allowed to play with such equipment.

23. Children 8 years of age and older may use the device, provided that they are supervised or directed in the safe use of the device and understand the hazards involved.Cleaning and user maintenance shall not be performed by children unless they are over 8 years of age and under supervision.Keep the device and its power cord out of reaches of children under 8 years of age

24. Never immerse basic equipment in water before use.

25. Please pay attention to the waste heat on the surface of the heating elements

26. Improper use may cause injury.

Package List:

1 x Heating Pot 

1 x Lid 

2 x Screw 

1 x Manual 

27 x Massage Stone 

1 x Lid Handle 

1 x Reservoir

Note: