Made in USA
Welcome to the revolution in air and water purification with the DigitalOzo Timertech, JL-1000 Programable Ozone Generator from JL Electronicdevices.
This advanced ozone generator combines state-of-the-art technology with intuitive functionality to provide you with an effective and convenient solution. With a power of 1000 mg/h, our generator guarantees effective disinfection and high-quality purification.
Highlights:
*Programmable Time Control. The digital timer allows you to program the duration and daily cycles of the purification to suit your specific needs.
*Modern and Compact Design. With a sleek black design, this ozone generator fits perfectly into any environment and takes up little space.
*Safe and Efficient. Our ozone generator is designed with the highest standards of safety and efficiency.
Assembly: Table
Color: Gray
Dimensions: 6" x 4" x 2"
Weight: 15 oz
Ozone output: 1000 mg/h
Accessories
1 x Ozone Generator
1 x Blue Silicone Tube 2m
1 x Check Valve
1 x 4" Long Rectangular Diffuser Stone
1 x QR Code Programming Manual
Instructions:
After configuring the data, you must wait 6 seconds for the data to be automatically saved. Press the SET key once to enter the time adjustment mode, the red numbers will blink, press the keys to increase or decrease the T1 adjustment time. After adjusting T1, briefly press the SET key again, and adjust the T2 time. After 6 seconds, the system will automatically save the configuration. Press and hold SET to enter the parameter configuration mode. There are two sets of parameters for you to select, P0 and P1. Briefly press SET in the current mode to switch between P0 and P1. The parameter in P0 can be adjusted by pressing the key to adjust its own timing mode. In parameter P1, you can configure by adding or subtracting the working mode using the keys.
Work mode of the Ozone Generator.
PO-O. The synchronization mode is in seconds. (0-999 s)
PO-1. The synchronization mode T1 is in minutes. (0-999 min)
PO-2. The synchronization mode is in hours. (0-999 h)
Work Modes:
P1-O... The generator will be off until the time in T1 reaches 0. Then the LED will turn on and remain operational.
P1-1... The generator turns on when the power button is pressed, after the set time, the generator will turn off.
P1-2... The generator is off for (T1 or PV) (Delay), then the generator turns on and operates for the set time in (T2 or SV), then it turns off until the power switch is pressed to turn it back on.
P1-3... The generator is on until the set time runs out.
P1-4... The generator is off until the time (T1 or PV) (Delay) counts down to 0, then the generator turns on until the SV time counts down to 0, then the generator is off, then it cycles again and again.
P1-5... The generator is on until the time (T1 or PV) counts down to 0, then it turns off and after (T2 or SV) time counts down to 0, the generator starts working and repeats the cycle automatically.