|
Feature: 1. 4 Stroke: 4 stroke brush cutter power engine with a displacement of 35.8cc and an idling speed of 2800‑3000rpm, providing strong power output.2. Efficient Operation: With high quality and efficient carburetor and air filter, low noise, low energy consumption, to ensure the normal operation of the brush cutter. 3. No Damage To Soil: Almost no effect on the soil surface, coupled with the soil fixing effect of the grass roots, is extremely beneficial to maintaining water and soil. 4. Application: Replacement parts for brush cutter power engine, good compatibility, suitable for 139 power 4 stroke brush cutter, easy to install and disassemble. 5. Well Made: Professional manufacturing, superb craftsmanship and high accuracy help to provide the best performance, simple operation and high work efficiency. Specification: Item Type: 4 Stroke Engine Package List: 1 x Engine 1 x Manual Note: 1. Oil maintenance: Before using the , check the oil level to see if it is between the upper and lower scales of the oil dipstick. The oil should be changed after the new machine is used for 5 hours, and the oil should be changed again after 10 hours of use, and then the oil should be changed regularly according to the requirements of the manual. The oil change should be carried out when the engine is in a warm state. Do not add too much oil, otherwise there will be: black smoke, insufficient power (excessive carbon deposits in the cylinder, small spark plug gaps). Phenomena such as engine overheating. The engine oil should not be too little, otherwise it will appear: the engine gear is noisy, and the piston ring accelerates wear and damage, caused serious damage to the engine. 2. Maintenance of the air filter: Check whether the air filter is dirty before and after each use, and wash it frequently. If it is too dirty, the engine will be difficult to start, black smoke, and insufficient power. If the filter is paper, you can remove the filter and dust off the dust attached to it; if the filter is spongy, it can be cleaned with gasoline, and some lubricating oil should be properly dropped on the filter to keep the filter moist. Conducive to the adsorption of dust. 3. The maintenance of the radiator: the main function of the radiator is noise reduction and heat dissipation. When the is working, the flying grass clippings will adhere to the radiator, affecting its heat dissipation function. In severe cases, it will cause the cylinder to be pulled and damage the engine, so after each use of the , to carefully clean up the sundries on the radiator. |
On 23/02/2024 at 17:45:21 AEDT, seller added the following information: