DE-DHL tracking number:
1 x New 3018 PRO GRBL Control CNC Laser machine with Emergency Button + Limit switch 1 x ER11 collet 10 x drill bits 1 x Set of allen wrench 1 x Power Supply 1 x Off-line controller 1 x User manual will send by email.
Note:This machine is NOT preassembled. You will receive all the parts in the package and you need to assemble it yourself.
Package description:
Basic parameters:Control software: GRBL control
Work area: 300x180x45 mm ((11.8×7.1x1.8")Frame:420x350x270mm (16.53x13.78x10.63")
Screw: T8 screw, lead 4mm, double copper nut to eliminate backlash
Stepper motor: Nema17 stepper motor 1.3A, 0.25N.m
Collet: ER11 3.175mm(can be equipped with 0-7mm)
Material: PA6 nylon + aluminum profile
Power supply:24V 5.6A power adapter (input voltage 110-240V)
775 Spindle Motor: 12-24VDC 20000RMP
Machining accuracy: about 0.2mm
Interface: USB
Machining instructions:
1)CNC: G-code,TAB, NC,NCC files
2) Laser: G-code, JPG, DXF file
3) Support WIN7. ( If used in WIN10 system, performance is not stable.)
Features:
1. The new GRBL1.1f control board 1. GRBL1.1f firmware, stable performance
2.Offline engraving (optional offline module), ffline tool setting,engraving
3. The laser supports PWM/TTL signal control, the power is adjustable from 0-100%!
4.Spindle supports PWM power 0-100% adjustable
5. Stepper motor overcurrent protection to avoid damage, upgrade integrated stepper motor drive, 2A high current, high stability
6.The laser directly enters the picture engraving, no programming, no design, Simple and convenient!
7. Professional shell protection, the fan actively dissipates heat, and does not heat up for a long time.
8. The engraving machine adds an emergency stop button & 3pcs of limit Switches.
This machine is NOT preassembled. You will receive all the parts in the package and you need to assemble it yourself.
Package description:
Control software: GRBL control
Work area: 300x180x45 mm ((11.8×7.1x1.8")Frame:420x350x270mm (16.53x13.78x10.63")
Screw: T8 screw, lead 4mm, double copper nut to eliminate backlash
Stepper motor: Nema17 stepper motor 1.3A, 0.25N.m
Collet: ER11 3.175mm(can be equipped with 0-7mm)
Material: PA6 nylon + aluminum profile
Power supply:24V 5.6A power adapter (input voltage 110-240V)
775 Spindle Motor: 12-24VDC 20000RMP
Machining accuracy: about 0.2mm
Interface: USB
Machining instructions:
1)CNC: G-code,TAB, NC,NCC files
2) Laser: G-code, JPG, DXF file
3) Support WIN7. ( If used in WIN10 system, performance is not stable.)
Features:
1. The new GRBL1.1f control board 1. GRBL1.1f firmware, stable performance
2.Offline engraving (optional offline module), ffline tool setting,engraving
3. The laser supports PWM/TTL signal control, the power is adjustable from 0-100%!
4.Spindle supports PWM power 0-100% adjustable
5. Stepper motor overcurrent protection to avoid damage, upgrade integrated stepper motor drive, 2A high current, high stability
6.The laser directly enters the picture engraving, no programming, no design, Simple and convenient!
7. Professional shell protection, the fan actively dissipates heat, and does not heat up for a long time.
8. The engraving machine adds an emergency stop button & 3pcs of limit Switches.