If you have any questions, please contact customer service first, do not open disputes easily, thank you!
Feature:
Take one minute to get your camera become a wireless camera.
Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation).
Connects to rear-view camera and front video screen.
How to Install a Camera with the Wireless Module:
1. Take out your stock license plate light at the back of your car.
Fix the camera to where the stock license plate light was.
2.Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power.
3.Connect the wireless module (transmitter) to your camera via the two cables - yellow plug for AV output and black plug for power.
4.Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative.
5.Connect the wireless module (receiver) to your car monitor - yellow plug for AV input.
6.Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative.
7.You will see the images when your car is in reverse shift.
Specification:
Product Name: CCD Sensor Reverse Camera
Image sensors: 1/3" color sharp CCD
TV System: NTSC default request
Minimum illumination: <0.5
BLC: Auto
White Balance: Auto
Working Power (DCV): 12V
Video Color: Colorful
Sync System: Internal
Waterproof Class: IP67IP68
Effective Pixels: 648x488
Resolution: 480TV lines
Video Output: 1.0Vp-p,75Ω
Electronic Shutter: 1/60(NTSC)-1/10000S
S/N ratio: Better Than 48db
Lens Angle: 170°
Operation Temperature: -20°C~80°C RH95% MAX
Storage Temperature: -30°C~85°C RH95% MAX
Current consumption: No more 150mA
Horizontal Sync Frequency: 15625KHZ
Work Range: Up to about 50m(Hollowness)
Transmitter/Receiver Cable Length: 1.5m
Application: Fit all RCA composite video connections
Package include:
1 x CCD Sensor Reverse Camera
1 x 2.4 Ghz Transmitter
1 x 2.4 Ghz Receiver
Note:
1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
3. There are no instructions included in this kit. Professional Installation Is Highly Recommended！
4. Please Compare The CCD Sensor Reverse Camera With Your Original One Before Purchasing！
Take one minute to get your camera become a wireless camera.
Wireless 2.4GHz transmitter/receiver set (12-Volt for vehicle installation).
Connects to rear-view camera and front video screen.
How to Install a Camera with the Wireless Module:
1. Take out your stock license plate light at the back of your car.
Fix the camera to where the stock license plate light was.
2.Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power.
3.Connect the wireless module (transmitter) to your camera via the two cables - yellow plug for AV output and black plug for power.
4.Connect the wireless module (transmitter) to the reverse light of your car to get the power - red wire for positive and black wire for negative.
5.Connect the wireless module (receiver) to your car monitor - yellow plug for AV input.
6.Connect the wireless module (receiver) to your car battery or cigarette lighter to get the power - red wire for positive and black wire for negative.
7.You will see the images when your car is in reverse shift.
Specification:
Product Name: CCD Sensor Reverse Camera
Image sensors: 1/3" color sharp CCD
TV System: NTSC default request
Minimum illumination: <0.5
BLC: Auto
White Balance: Auto
Working Power (DCV): 12V
Video Color: Colorful
Sync System: Internal
Waterproof Class: IP67IP68
Effective Pixels: 648x488
Resolution: 480TV lines
Video Output: 1.0Vp-p,75Ω
Electronic Shutter: 1/60(NTSC)-1/10000S
S/N ratio: Better Than 48db
Lens Angle: 170°
Operation Temperature: -20°C~80°C RH95% MAX
Storage Temperature: -30°C~85°C RH95% MAX
Current consumption: No more 150mA
Horizontal Sync Frequency: 15625KHZ
Work Range: Up to about 50m(Hollowness)
Transmitter/Receiver Cable Length: 1.5m
Application: Fit all RCA composite video connections
Package include:
1 x CCD Sensor Reverse Camera
1 x 2.4 Ghz Transmitter
1 x 2.4 Ghz Receiver
Note:
1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
3. There are no instructions included in this kit. Professional Installation Is Highly Recommended！
4. Please Compare The CCD Sensor Reverse Camera With Your Original One Before Purchasing！
