Welcome to our store!
To avoid you buying the wrong parts, DO CHECK the compatible chart above before placing order.
-
Choose a vehicle from the "My Garage" list. Or
-
Enter your vehicle's details with Year / Make / Model / Trim / Engine. Or
-
Contact us: Ask us for double check.
Fits
- Fits Volvo C30 2007-2013
- Fits Volvo C70 2006-2013
- Fits Volvo S40 2005-2011 FWD Only
- Fits Volvo V50 2005-2011 FWD Only
Product Introduction
- Brand New Wheel Hub Assembly
- Direct replacement
- Built to strict quality control standards
- Replaces dealer part numbers:513255, WH513255, SK513255, 313406040, 734255, H513255, 051-6226, WA513255, HA590323, BR930675, AX13255, 790-0004, WE61096, 1411-246647, 40039009E, 31262950, 31212698, 30730828, 30714492, 30683161, 30666605, 30666130, 512411, BR930519, HA590322, 790-3030, BHA54349, 101885, WE61439, WA512411
Features
- Wheel studs already installed
- Fits 5 Lugs Wheels
- ABS Type: Encoder (Front); ABS Sensor Connector (Rear)
- Drive Type: FWD
Package Include
- 2×Front Wheel Hub Bearings - 513255
- 2×Rear Wheel Hub Bearings - 512411
The most common symptoms of a worn wheel hub bearing include
- Strange humming, rumbling, or growling noise
- Side pulls during brake application
- Uneven brake pad wear
- Wheel vibration and wobble
How To Remove a Wheel Hub Assembly
- With the vehicle still on the ground, use a breaker bar or impact wrench to loosen the wheel hub nut, then the lug nuts.
-
Jack up the vehicle and insert your jack stands.
-
Remove the wheel and set it aside.
-
Remove the brake caliper and place it somewhere that does not put stress on the brake line.
-
Remove the rotor.
-
Remove the axle nut.
-
Unplug the hub assembly cord.
-
Remove any bolts on the wheel hub assembly.
-
Follow the manufacturer’s recommendations for removing the old hub assembly. Many require special tools that should be used to avoid damaging other parts of the vehicle. Seriously, the wheel bearing puller tool will make this job much simpler.
-
As you remove the wheel bearing, be cognizant of the axle and avoid letting it drop, get dirty, or put stress on any other parts.
-
Clean off any corrosion found on the involved parts.
-
To replace the old hub with the new hub, insert the new hub (with a press, if necessary), replace the old axle nut, and follow the previous steps in reverse.
Tips For Hub Removal
Wheel hub assemblies are often extremely stubborn to remove. If you’re already in the middle of the job but don’t have a puller tool, these other tools and methods might be able to help. Just use extreme caution not to damage anything, and always use necessary safety precautions.
- Slide hammer
- Rubber mallet
- Heat and metal hammer
- Penetrating spray
Notice
- Please check your vehicle compatibility before buying.
- Please check your old number and pictures before buying
- Any modifications to an item of any kind before contacting us will void any and all warranty coverage for this item. Please contact us before modifying the part so that we have the opportunity to correct the situation.
| Item Specifics | |
|---|---|
| UPC | Does not apply |
| Brand | CSsunny |
| Manufacturer Part Number | 11504644 |
| Placement on Vehicle | Front |
| ABS Sensor | Not Included ABS sensor |
| Material | Steel |
| Finish | Polished |
| Type | Wheel Hub & Bearing Assembly |
| OE/OEM Part Number | 513255, 512411 |
| Items Included | 4Pcs |
| Interchange Part Number | WA513255, 29513255, BR930519, HA590322, 790-3030, WE61439 |
| Anti-lock Braking System | No |
| Bolt Pattern | 5 x 4.25 in (5 x 108 mm) |
| Front Spline Quantity | 36 |
| Bolt Circle Diameter | 4.25 in. / 108 mm |
| Brake Pilot Diameter | 2.5 in. / 63.5 mm |
| Rear Flange Bolt Hole Quantity | 4 |
| Rear Knuckle Bolt Circle Diameter | 3.84 in. / 97.6 mm |
| Flange Bolts Included | No |
| Flange Diameter | 5.18 in. / 131.5 mm (Front); 5.35 in. / 136 mm (Rear) |
| Flange Offset | 2.42 in. / 61.5 mm (Front); 2.46 in. / 62.6 mm (Rear) |
| Flange Shape | Modified |
| Hub Pilot Diameter | 3.07 in. / 78 mm (Front); 2.91 in. / 73.8 mm (Rear) |
| Wheel Pilot Diameter | 2.49 in. / 63.2 mm |
| Wheel Stud Quantity | 5 |
| Wheel Stud Size | M12x1.5 |
| Wheel Studs Included | Yes |
| Rear Knuckle Bolt Hole Size | M10x1.5 |
| Manufacturer Warranty | 1 Year |
| Universal Fitment | No |
| Vintage Car Part | No |
About Us:
We are committed to making the best auto-parts products and providing you with better services.
So if you have any quesiton or problem, please fell free to contact us about that.
Payment:
Paypal only.
Shipping:
2-8 working days in transit.
Product will be shipped within 2 business days after full payment is received and verified.
USPS, UPS, FedEx shipping will be provided.
Delivery time is about 2-8 business days to most of addresses.
Returns:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
30-day free return provided.
Contact Us:
Any quesiton or problem, do contact us please.
We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.
