Features:
l The handle is made of TPV material, which is integrally formed, with good anti-aging, heat resistance, high toughness, high resilience and other properties, durable and environmentally friendly, and has a wider range of applications.
l The product has a five-speed adjustment switch, the temperature can be adjusted at will, keep your hands warm in winter and say goodbye to frostbite
l The product has a built-in smart chip. When the voltage is too high or too low, it will automatically cut off the power supply and enter the standby state, which is safer to use.
l The product adopts high-strength waterproof design, which is not afraid of wind and rain, and can be used normally in rainy and snowy weather.
l The plug at the end of the product handle is detachable, and it can be sealed or opened, which is more convenient to use.
l When the voltage is lower than (12.5±0.2) volts, the heating handle turns off the output, and the controller enters the sleep state
Specification:
l Material: TPV
l Working Voltage: 12.4V-15V
l Output Power: 20-40W
l Operating Temperature: -15°C-50°C
l Applicable Pipe Diameter: 2.2cm
l Size: 13.3x3.7cm
l Applicable Model: For The Installation And Use Of DC12v Scooters, Motorcycles, ATVS, And Three-Wheeled Motorcycles
Instructions for use:
l The red wire is positive and the black wire is negative, please do not connect wrongly, otherwise it will easily cause damage to the product
l Power on the controller, the indicator light flashes 3 times, and enters the standby state [Note: the flashing color of the indicator light is green to indicate normal, and the color is blue to indicate that the protection function does not work (the controller is faulty), but it can also be heated normally]
l In the standby state, press the button on the handle, if the power supply voltage at this time is lower than the starting voltage of the electric heater, the red indicator light will flash a few times and enter the standby state.
l In the standby state, press the button on the handle, if the power supply voltage at this time is higher than the electric heating start voltage, the system will enter the rapid heating, so that the handle will heat up rapidly, and after a period of time, it will enter the steady heating.
l In the working state, each time the button is pressed, the electric heating power is increased by 20%, a total of 5 gears, and the colors of the indicator lights are: blue-cyan-green-purple-red.
l In the working state, if the power supply voltage is lower than the electric heating start voltage, the corresponding gear indicator flashes. If the voltage remains lower than this voltage within 7 seconds, the controller will cut off the electric heating output and enter the standby state. If the normal voltage is restored within 7 seconds, the indicator light will be always on and it will work normally.
l In the working state, if the power supply voltage is higher than the set maximum voltage value, the controller immediately cuts off the heating output and enters the standby state.
Package:
l 1x Glue , 1x Throttle Core x1, 2x Handle Plug
