Details

Specifications: H13 9008

1. Condition: 100% Brand New / Never Used
2. Voltage: DC 9-32V ( Fit 12V, 24V Vehicle )
3. IP Rate: IP68
4. LED type: COB LEDs
5. Beam Angle: 360°
6. Color Temperature: 6000K-6500K White
7. Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
8. Operating Life: >50000hrs
9. Operating Temperature: -40 - +80°C
10. Application: High/Low Beam Head Lights
11. Number of Bulbs: 2
12. To Fit: High/Low Beam Head Lights KIt
13. Placement on Vehicle: Left, Right, Front
14. For a few newest years make cars(About 0.1%) , Germany Cars, Dodge, Jeep, Toyota, Nissan, Ford, Chevy Cars and DRL Model may need add Load Resistors(Not including) to stop flickering Issue or fix error message )

 

LED headlight advantages:
****LED lamps are more energy and power than conventional halogen lamps.
****The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.
****Instantly start without strong current impact, improve battery life by more than 30%.
****Fast cooling, using the most advanced, heat-dissipating structural design.
****The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%.
****Low heating temperature, The working temperature of helium can reach 800°-1000°
****LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
****Car LED headlight color temperature are balancing. Xenon bulbs are clear in the same color, about 6000K.
 
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

Package Content:
2 x H13 9008 LED Headlights Bulbs
New and old packaging will be shipped randomly！！
Details

Specifications: H13 9008

1. Condition: 100% Brand New / Never Used
2. Voltage: DC 9-32V ( Fit 12V, 24V Vehicle )
3. IP Rate: IP68
4. LED type: COB LEDs
5. Beam Angle: 360°
6. Color Temperature: 6000K-6500K White
7. Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
8. Operating Life: >50000hrs
9. Operating Temperature: -40 - +80°C
10. Application: High/Low Beam Head Lights
11. Number of Bulbs: 2
12. To Fit: High/Low Beam Head Lights KIt
13. Placement on Vehicle: Left, Right, Front
14. For a few newest years make cars(About 0.1%) , Germany Cars, Dodge, Jeep, Toyota, Nissan, Ford, Chevy Cars and DRL Model may need add Load Resistors(Not including) to stop flickering Issue or fix error message )

 

LED headlight advantages:
****LED lamps are more energy and power than conventional halogen lamps.
****The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.
****Instantly start without strong current impact, improve battery life by more than 30%.
****Fast cooling, using the most advanced, heat-dissipating structural design.
****The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%.
****Low heating temperature, The working temperature of helium can reach 800°-1000°
****LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
****Car LED headlight color temperature are balancing. Xenon bulbs are clear in the same color, about 6000K.
 
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

Package Content:
2 x H13 9008 LED Headlights Bulbs
New and old packaging will be shipped randomly！！

(1) All items will be shipped in 1-2 work day after receiving your payment .

(2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver. It may take 5-8 working days for remote areas, please be patient.

(3) Tracking numbers for all orders are added to eBay once they have been dispatched; please login to eBay to find the tracking information for your order.

 

1. You can use a variety of payment methods such as credit, debit, and gift cards, Apple Pay, Google Pay, PayPal, and PayPal Credit.
2. Items will be shipped to your eBay address. Please make sure it is correct.
3. Payment must be received 4 days after auction ended.

 (1). We offer 60 days return policy. Please contact us within 60 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.

(2). All returned items should be in the original packaging , return tracking information should be provided ..

(3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .

 

DataCaciques