PCI-E X4 1 to 4 USB3.0 Multiplier Card+4xPCI-E 16X Riser+4xPCI-E 1X Adapter+VER009S Extension Cable Kit Desktop Computer for BTC Mining PCI Express Extender
PCI-E 1 to 4 Riser Card:
Feature:
1. Effectively solve the problem that the PCI-E interface of the main board is not enough, and one interface can be expanded to 4
2. The plug-in board design is adopted, which is directly connected to the main board interface without extension cable, and can be fixed to the chassis, which greatly improves the stability and reliability!
3. PCI-E to USB expansion card has PCI-E X1 bus interface, which can connect 4x, 8x and 16x graphics card interfaces
4. The main control board adopts the direct power supply mode of PCI-E interface, and there is no need to connect the external power line. The power of the main control board is free from external interference and has higher stability!
5. Reduce the number of adapters and transfer lines. One line is directly connected to the interface to effectively reduce interface interference and wire loss, ensure data reliability, and improve work efficiency!
6. The motherboard IC adds a radiator, and multiple lines work at the same time to solve the heat dissipation problem.

Specification:
Bus interface: PCI-E x1 (compatible with X4 / x8x / 16 graphics card interface)
Number of interfaces: PCIe USB interface * 4
System support: for DOS/Linux/WINXP/Win7/Win8/Win10, etc
Product size: 120 * 66 * 22mm/4.7X2.6x0.87in

PCI-E to PCIe adapter extension cable:
Feature:
The graphics card slot adopts high-quality connector to make the graphics card contact better
PCI-E connector plug is gold-plated to increase wear resistance and conductivity
The power supply of the graphics card adopts four 16V solid-state capacitors, which is resistant to high temperature and makes the power supply of the graphics card more stable
The extension line is equipped with 6pin interface to strengthen power supply and solve the problem of line burning due to insufficient power supply capacity
The utility model solves the problems of fragile and easy burning of the welding point of the traditional flat wire, attenuation of the transmission signal, insufficient length of the flat wire and so on
A slot with a fixing buckle is convenient for removing and fixing the graphics card so that the graphics card will not fall off from the slot.
The 4Pin and 6pin interfaces are power optional, which provides power independent of the adapter card and reduces the burden on the motherboard when using more cards. Equipped with 4 explosion-proof capacitors, the graphics power supply is more stable and safe
The riser card kit version 009s is a better solution for setting up GPU mining equipment. 4 solid state capacitors, 60 cm USB 3.0 cable, suitable for Window system / XP and for Linux

Specification:
Model: VER009s
Product material: Taijin + PCEA
Interface: PCI-E 1x
Wire length: 60cm/23.6in
USB wire color: Red
Adapter card size: 120 * 40 * 5mm/4.7x1.6x0.3=2in
Product weight: 90g

Installation instructions:
1. Step 1: when you use the adapter card, you need to turn off the computer before connecting the adapter card.
2. Step 2, connect to the PCI-E slot of the motherboard. Use USB3.0 data cable adapter connects the ends of the two USB ports. Connect the power supply.
3. Step 3: after completing the above two steps, do not rush to insert your PCI-E card, start the computer to see if your computer has recognized the transfer card. If the card is not found, repeat the above operations.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

1 x PCI-E 1 to 4 Riser
4 x PCI-E 16X Extender
4 x PCI-E 1X Adapter
4 x SATA 15PIN to 6PIN Power Cable
4 x USB 3.0 Cable