2m Hose Electric Vibrator Air Bubble Removing 35mm Vibrating Poker Hand Held

Description

An efficient machine can facilitate your outdoor work, reduce your workload, and increase your productivity. Featuring a 1300-watt motor, this concrete vibrator is suitable for curing cement and removing all air bubbles to give you the toughest cement possible. It also makes the surface of the concrete flat, preventing cracks and defects from appearing after the concrete has cured.

 

 

Key Features

Excellent Materials: The shell material is made of high-grade nylon with high strength to resist abrasion and impact. The vibrating rod is made of steel wire and rubber materials, which is not easy to wear and break even after a long time of vibration.    

 

High Efficiency: The high power (1300W) pure copper motor can make the product rotate with a high speed of 4300 rpm so that the concrete mixing can be done efficiently in a shorter period, thus saving you time, ensuring a high degree of homogeneity of the concrete and obtaining a smooth and even surface.

 

Good Performance: It removes air bubbles from the concrete and improves the density of the concrete while ensuring that the concrete is poured evenly over the reinforcing steel skeleton, thereby increasing the strength of the entire building.

 

Easy to Operate: Ergonomic handle design allows for better grip and control. The locking switch allows the machine to run for a long time, reducing work intensity and relieving finger fatigue.

 

Lightweight and Compact: It is lightweight and compact and allows you to easily carry it to the workplace.

 

Large Work Area: It is equipped with a long vibrating rod (6.6ft), allowing you to cover a large area to promote work efficiency. 

 

Low Noise: The all-copper motor runs smoothly and works with very low noise, which provides you with a more comfortable and quieter working environment.

 

Guaranteed Customer Service: We aim to provide quality products and services. If you have problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.

 

Details

Heat Dissipation Holes: The product is designed with multiple holes on both sides, which can ensure that the motor can dissipate heat for a long time, prevent burns, and prolong the life of the motor.

 

Threaded Connection: The high-precision threaded connection makes the vibrating rod lock firmly with the main unit and is not easy to fall off.

 

Application

It is widely used in commercial concrete, bridges, port construction, large dams, hydroelectric power plants, transportation, water conservancy, port, mine and metallurgy, high-rise building foundation pouring piles, dense steel mesh concrete walls and large, medium and small construction projects, patching and other repair jobs, etc.   

 

Specifications

Model: 35-1

Material: Nylon, Steel Wire, Rubber, Copper

Style: Handheld Concrete Vibrator

Color: Yellow

Power Source: Corded Electric

Motor Type: Pure Copper Motor

Plug: US Standard

Power: 1300W

Actual Power: About 1000W

Speed: 4300RPM

Plug Voltage: 110V

Power Cord Length: 2m/6.6ft

Vibrating Rod Size(L*D): 2m*35mm/6.6ft*1.3inch  

     

Package Included

1* Concrete Vibrator

1* Vibrating Rod

 

Notes

  • Before running the concrete vibrator, you should check whether the power cord connection is correct and put on insulated gloves (not included). After the power is turned on, if the concrete vibrator does not produce vibration, you can generally knock the end of the concrete vibrating rod to the ground, and after the vibrator makes a smooth and powerful chirping sound, you can carry out the pounding operation.
  • When a vibrating rod works, it should be inserted vertically or inclined into the soil, pounding vibration after some time can be. The vibration of the vibrating rod should be up and down pumping. The vibrating rod should not be bent more than 60°.
  • After working continuously for half an hour, the vibrating rod should stop for a while to prevent the machinery from heating too much and damaging the machine parts.
  • After using it for some time, the vibrating rod should be checked to see if the threaded connection of the rod head is loose to prevent the mortar water from penetrating the rod, causing the vibrating rod not to vibrate.   
  • Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order. 
Notes:
1. The thread is the reverse tooth and should be tightened in the reverse direction. The original direction can not be installed, so change the direction.
2. After the vibration rod is installed and energized, the tip of the vibration rod can be generally knocked to the ground, and the vibration rod can be rammed after it sends out a smooth and powerful sound.
 
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
 
2-9 working days to: USA
 
    •  
    • We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
 
  •  
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
PushAuction
DataCaciques