Spacer Thickness:  2 inch or 51 mm

 

Vehicle bolt pattern:  8x6.5 inch or 8x165.1 mm

 

Wheel bolt pattern：8x6.5 inch or 8x165.1 mm

 

Thread Size：9/16" x 18

 

Torqued Down By Hand At: 135-145 FT/LBS

Hub Bore: 126.15 mm

 

Number of Pieces: 4pcs

Dodge Ram 2500 1994-2010
Dodge Ram 3500 1994-2010
Ford E-250 2003-2013
Ford E-250 Econoline 1992-2002
Ford E-350 Econoline 1992-2000
Ford F-250 1988-1998 (9/16" Studs Only, 1/2" Studs will NOT fit)
Ford F-350 1988-1997 (9/16" Studs Only, 1/2" Studs will NOT fit)
Ram 2500 2011-2014 (9/16" Studs Only, M14x1.5 Studs will NOT fit)
Ram 3500 2011-2014 (9/16" Studs Only, M14x1.5 Studs will NOT fit)

1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.

2. Measure the fender gap and stock bolt length to choose suitable thickness.

(For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)

3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.

4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.

5. Returns are only accepted if unused and not  installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)