1 Roll 3D Printer Filament PLA+ Printing Consumables 1.75mm Multicolor Available
Description：

They become soft and pliable when heated and return to a solid when cooled. This process can be repeated again and again.
Our vacuum sealed packaging guarantees you to experience the best performance by isolating moisturized environment to the filament.
Manufactured to very tight tolerances and a wide extruder temperature range, making for smoother 3D printing, and fewer extruder nozzle problems.
Material: PLA+, Weight: 1KG (approximately 2.20 lbs ) spool.
PLA has low shrinkage rate, even print larger models perform well.
Engineering grade PLA suitable for a range of uses, from medical PPE to hobbyists.
Reduce blockages and increase production time to save money! Unbeatable print speeds of up to 120mm/s.
The advantage of this material is that it can be used in 3D printers easily, that it allows a high quality of printing even in tricky details and an excellent lamination of the printed object.
Our 3D print filament features a superior heat resistance and fluidity to cheaper alternatives thanks to a high purity material and precision tolerance of ± 0.05 diameter which is strictly controlled throughout the entire production process.
To ensure extra tough 3d printed components and an increased heat resistance to <95°C make sure you anneal the finished component.
Material: PLA+
Diameter: 1.75mm ± 0.05
Roundness: >95%
Impact Strength: 23 kJ/m2
Tensile Strength: 53 MPa
Tensile Modulus: 3600 MPa
Specific Gravity: 1.27 g/cc
Compatible with: Ender 3 Pro, Monoprice Voxel, Formlabs Form 3, LulzBot Mini 2, XYZ da Vinci Nano, Polaroid PlaySmart, Ultimaker 3, Toybox 3D Printer and many more.

Annealing Instructions:
1. Preheat a convection oven to 110°C / 230°F
2. When the oven is preheated, quickly put your printed object (tip: Keep the supports attached) in the oven and start a timer.
- We recommend placing the object on a flat aluminium sheet or similar.
- For small objects with thin walls & medium infill set a 20-minute timer.
- For large objects with thick walls & medium infill set a 60-minute timer.
3. When the object is done baking, do NOT remove the object, but instead just turn off the oven.
4. Wait for the oven to cool down to room temperature.
5. Remove the object from the oven (remove the supports).
(Please note a higher infill percentage = less shrinkage during annealing)

Specifications:

Material: PLA+
Diameter: 1.75mm
Color: Black, Grey, White, Gold, Green, Sliver, Blue, Red, Orange, Purple.
Density: 1.25+-0.05g/cm⊃3;
Print temperature: 210°C - 240°C
Net Weight: 1kg / 2.2lb
Package Size: 21 * 21 * 8cm / 8.3 * 8.3 * 3.1in

Package included:

1 * 3D Printer Filament
  • We only accept the Paypal payment methods.
  • All major credit cards are accepted through secure payment processor PayPal.(* If you use e-check on PayPal, delivery may take longer, as we will hold your order until your e-check clear)
  • Item will be shipped within 1 business day after confirmed payment. (Not including weekend or public holidays)
  • Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses.
  • All items will be checked strictly before shipping and it will be shipped to your PayPal address.
  • Estimated delivery time is 1 - 4 working days (Not including weekend or public holidays)
  • Delivery times may vary particularly during peak periods or unexpected weather conditions. In event of a very unlikely slight delay, your patience would be highly appreciated.
  • We do not provide pick up or local collection service so far.
  • We accept return within 60 Days of dispatch.
  • For exchange buyer MUST return the defective item for 1 to 1 exchange, return cost due to buyer.
  • We do not cover defects and/or damage resulting from normal wear and tear of the equipment or otherwise due to the normal ageing of the equipment, including battery deterioration.
  • For free shipping means we paid the shipping fee on your behalf, that fee will be deducted.
  • In case return cause by wrong buy, return postage will be at buyer side also.
  • Please contact us immediately about any your return before shipping back the Once the item has shipped the regular return policy applies. Notifying us ahead of time will help us to ensure that your return is dealt with promptly upon arrival.
  • Very appreciated for your support. I hope you are happy with your purchase.
  • We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us.
  • We request that you contact us immediately BEFORE you give us or feedback, so that we can satisfactorily address your concerns.
  • If you have any problem, please feel free to contact us via ebay message, we will reply your email within 24 hours (except weekends and holidays). We will do our best to solve your problem as soon as possible.
  • We appreciate your continued patience and willingness to work with us. Thank you for choosing us and have a great day!
  • Welcome to my shop,We offer an extensive range of products selected by our professionals.superiority in details and quality is a high priority.
  • We are increasingly expanding international markets based on high quality products, excellent service, reasonable price boas and timely delivery. Please contact us at any time for more information.We work hard to make sure EVERY CUSTOMER 100% approvingly.
PushAuction