Rustins Quick Drying Polyurethane Varnish Satin Clear 250ml

A water-based, non-yellowing polyurethane varnish that is tough and durable and will resist cracking, peeling and blistering. Can be used on bare wood, hardboard, MDF, unsealed cork. For interior and exterior use.

• Suitable for All types of wood

• Surface Preparation - Surfaces must be clean, dry and free of wax, grease and contaminants, smooth and sound. Fill large cracks, open joints and damaged areas with a high-quality flexible filler. Wash oily woods, knots or resinous areas with white spirit. Remove mould, lichens, algae & moss with brush, scraper & domestic bleach, then rinse thoroughly and allow to dry. Rustins Wood Dye may be applied to bare wood prior to varnishing

• Instructions for Use - Using a synthetic brush, apply liberally with a full brush finishing with the grain. Externally the first coat may be diluted with water on hot days (up to 15%). Do not apply to hot surfaces or in strong sunlight if possible or if rain is likely. Apply 3 coats. Lightly sand after first coat if there is raising of the grain. Note: with every successive coat of coloured varnish the finish will become darker, but may then be overcoated with clear varnish to maintain a satisfactory shade whilst achieving the prerequisite total coating thickness.

Features and benefits

• Long Lasting Wood protection

• For all types of interior and exterior wood

• Low Odour & Non Toxic

• Enhances the beauty of wood

Legal Information

May cause an allergic skin reaction. Keep out of reach of Children.