Highlights![]() ![]() ![]() ![]() ![]() |
Manufacturing![]() ![]() |
Item Condition Information
The item is in perfect working condition (will work as well as a new item). It has been previously opened and repackaged. There are some minor cosmetic blemishes (scuffs / scratches / nicks) from warehouse handling, shipping damage, or install/test fit. It has been carefully inspected and verified that it will not affect usage/performance.
Important Note About Pictures
Please note that the pictures depicts a "new" product and will not be the actual item you will receive. If you have any questions or concerns, please message us.
Quantity | Two (2) Spacers (8 Lug Nuts Included) |
Thickness Per Spacer | 2.0" (50mm) |
Centerbore | 74.1mm |
Bolt Pattern | 4x110 |
Material | T6 Aerospace Grade Aluminum |
Stud/Nut Thread Size | 10x1.25 |
Stud Grade | Metric Grade 10.9 |
(Click Corresponding tab below for Fitment & Shipping Information)
DO NOT ADD "NOTES TO THE SELLER" DURING CHECKOUT
We strive to ship your order as fast as possible so we utilize an automated processing system. Because of this, these messages are not displayed and will not be seen by any of our staff. If you have questions/requests/comments/information, send us an eBay message or give us a call
Important Safety Advisory
As with any component you purchase for your vehicle, installation should be done by a qualified technician. We've provided the following information as a general reference for purchasing and installing these spacers/adapters. The following list isn't all-inclusive and may be different depending on the vehicle you drive, type of wheels you have, and ideal setup you're trying to achieve. Failure to install properly may cause your lug nuts/wheel studs/spacers to loosen or break while driving. If you are not confident or familiar with the installation, please ask a trained professional for help.
Before Purchasing
- Measure your wheel gap for clearance. You will need at least 2.0" (50mm) of clearance to prevent the wheel/tire from hitting the fender or fenderliner.
- The vehicle’s wheel studs need to be measured. If the studs are longer than 2.0" (50mm), it will extend past the spacer's surface. It may not be possible to bolt the wheel safely onto the spacer, depending on whether your wheels have pockets/cavities around the mounting pad.
- If your vehicle does not have 10x1.25 threaded wheel studs, you would need to purchase the correct threaded lug nuts for proper installation.
Before Installation
Check compatibility of spacer-to-hub, spacer-to-wheel, and lug nuts (thread pitch & seat type)
During Installation
- Installation should be performed by a trained professional using proper tools.
- Avoid using an impact wrench or any pneumatic tools; improper usage may cause damage to components.
- Ensure proper thread engagement. Typically, its a minimum of 5-8 turns before the lug nut tightens, however, it varies depending on thread pitch and type of vehicle.
- ALL Lug nuts MUST be torqued to manufacture specifications.
After Installation
- Test drive your vehicle to ensure the hardware is installed properly. Pay close attention for any noises, vibrations, or compatibility issues (such as fender rubbing).
- Inspect and re-torque ALL lug nuts after 25-50 miles of driving. This requires you to take off the wheels to tighten the lug nuts holding the spacers to your vehicle.
Note: No returns or exchanges once product has been installed on the vehicle.
IMPORTANT - Please Read: Buyers MUST confirm their ATV/UTV Nut size is 10x1.25. These wheel spacers will not work with any other sized nut. Please verify this to prevent fitment problems.
Honda
1997-2009 Recon 250
1988-2000 FourTrax 300
1986-1987 FourTrax 350
1987-1989 FourTrax Foreman 350
2000-2009 Rancher 350
2004-2009 Rancher 400 (4WD)
1996-2006 Foreman 400 (4WD)
2004-2016 Rancher 420 (4WD)
1998-2004 Foreman 450 (4WD)
2005-2016 Foreman 500 (4WD)
2001-2016 Foreman Rubicon 500 (4WD)
2003-2007 Rincon 650
2006-2016 Rincon 680
Yamaha
1995-1998 Timberwolf 250
1999-2005 Bear Tracker 250
2006-2009 Big Bear 250
1996-2005 Big Bear 350 (2WD)
1987-2008 Big Bear 350 (4WD)
1987-2013 Big Bear 400 (4WD)
2005-2006 Bruin 250
2004-2006 Bruin 350
1995-2010 Wolverine 350 & 450
2007-2013 Grizzly 350 & 450 (4WD)
2009-2012 Grizzly 550 (4WD)
2007-2016 Grizzly 700 (4WD)
1993-2004 Kodiak 400 & 450
2005-2006 Kodiak 400 & 450 (4WD)
2004-2014 Rhino 450, 660, 700
Suzuki
2002-2007 Eiger 400
2002-2009 Ozark 250
2008-2016 King Quad 400
2001-2010 King Quad 450
2011-2016 King Quad 500
2005-2007 King Quad 700
2009-2016 King Quad 750
2003-2007 Vinson 500
Kawasaki
2006-2012 Brute Force 650i (4WD)
2005-2016 Brute Force 750i (4WD)
For our spacers with a lip, your wheel centerbore must be equal to or larger than 74.1mm
Some ATVs requires different bolt pattern front and rear spacers, please carefully read the above fitment guide
Don't see your ATV above? Message us with the year/make/model of your ATV and we'll be glad to find a compatible spacer
See eBay's "Shipping and Payments" tab for shipping cost and estimated delivery time.
Local Pick up / Will Calls - Not Available
NOTE for International Customers: Buyer is responsible for any import taxes and/or customs charges for the item. The amount may vary from country to country.