MRCARTOL fully automatic smart charger is suitable for all vehicles equipped with 24V lead-acid batteries, such as forklifts, floor washers, sightseeing cars, and golf carts. The fan always runs during charging to effectively cool the charger and ensure stable operation. The operating temperature range of the 24 volt battery charger is 0℃~+45℃. When the ambient temperature exceeds 65℃, the charger will automatically shut down for protection.

Features:
➤ 1.【Voltage and Current Display & Charging Completion Prompt】The 24 volt charger adopts constant voltage and constant current mode for intelligent charging. The display shows "2420" to indicate that this is a 24V20A charger. When charging, the display will alternately show the charging voltage and current (the last letter "U" means "Voltage" and "R" means "Current"). After the battery is fully charged, the forklift battery charger will automatically stop output and the display will show "FULL".
➤ 2.【Fault Code Prompt and Fan Stops Working】When the 24v charger has the following six conditions, the corresponding fault code will be displayed on the screen, the fan will stop rotating, and the charger will stop working. (1) No-load state; (2) When the connected battery pack voltage is lower than the pre-charge voltage limit; (3) When the voltage of the connected battery pack is higher than the trickle charging voltage; (4) The temperature exceeds 65°C; (5) Short circuit; (6) Reverse polarity.
➤ 3.【Output Protection Device & Charging Time Control】During the charging process, the 24v battery charger will automatically adjust the output voltage and current. When the battery is reverse-connected and the output is short-circuited, the internal circuit of the 24v charger is disconnected from the battery and will not damage the charger. The 24 volt charger is set with a maximum charging time (15 hours), which can effectively avoid battery damage caused by overcharging.
➤ 4.【7.4ft Cable & Anderson Plug & Portable Handle】The 24v lead acid battery charger comes with a 4ft power cord, 3.4ft charging cable and battery quick connector to charge your vehicle quickly and safely. The 24 volt forklift battery charger also comes with a spare plug connector and 2 terminal pins for wider use. The 24v battery charger weighs 4.6 pounds and has an easy-to-carry handle on the top, so you can easily carry it anywhere.
➤ 5.【FCC and ETL Certification & 2-Year Warranty】This 24v battery charger has an input voltage of AC 100-240V, has FCC and ETL certification, and can also repair batteries with vulcanized plates. We provide a 24-month free warranty for this 24-volt battery charger to ensure your shopping experience. If you have any questions about this 24 volt battery charger maintainer, please feel free to contact us!



• 20A Fast Charging
The charging current of battery charger is up to 20A and working efficiency is up to 90%。It is also equipped with a 175A high amps quick connector for fast charging.


• Safe Charging
Avoid Battery Damage: The charger is set with a maximum charging time (15 hours) before leaving the factory, which can effectively avoid battery damage caused by overcharging.

• Repair Batteries
 This smart 24v charger can repair batteries with vulcanized plates.

Note: If the charger is not used for a long time or the battery is saturated, it is recommended to remove the socket and disconnect the power supply.


• Wide Application:
Suitable for 24V vehicles with 100AH-200AH lead-acid batteries, such as electric pallet trucks, electric forklifts, and electric stackers.

Note:This charger can be used whether it is a 24V battery composed of two 12V batteries or four 6V batteries.



• Powerful Output Protection
(1) When the polarity is reversed or the output is short-circuited, the internal circuit of the 24v battery charger is disconnected from the battery and will not damage the charger.

(2) When the voltage of the connected battery pack is lower than the precharge voltage limit or when the voltage of the connected battery pack is higher than the trickle charging voltage, a fault code will be displayed on the screen and the 24 volt battery charger will stop working.


• Special Fan Design and Overheating Protection
The operating temperature range of this 24v charger is 0℃~+45℃ (32℉-113℉). When the ambient temperature exceeds 65℃ (149℉), the charger will automatically shut down for protection.



• Display Charging Details and Fault Codes
1. This smart charger will display the charger specification (24V20A), and then alternately display the charging voltage and current (the last letter "U" is "voltage" and "R" is "current"). The charger displays "FULL" which means the battery is fully charged.

2. When the charger has the following six conditions, the corresponding fault code will be displayed on the screen and the charger will stop working. (1) No-load state; (2) Low voltage; (3) High voltage; (4) Temperature exceeding 65°C; (5) Short circuit; (6) Reverse polarity.


Specification
Applicable Batteries: All types of lead-acid batteries
Working Mode: Switch-type microcomputer single-chip control
Input Voltage: AC 100V-240V
Input Frequency: 47HZ-63HZ
Input Current: ≤10A
Output Voltage and Current: 24V 20A
Output Power: 600W
Work Efficiency: 90%
Power Factor: ≥0.98
Compliant Standards:: FCC、ETL
Working Temperature: 0℃~+45℃
Operating Humidity: 20%~85%
Package:1xCharger;1xPower corder;2xTerminal pins;1xAnderson plug
PushAuction