eBay

Feature:

1. This pump is mainly used to improve the in the low water pressure area and increase the water pressure such as the faucet.
2. Adopts all copper core coil winding with multiple strong magnetic stainless steel sheets and a copper double‑sided impeller with good performance.
3. The speed can be 2860/min and the maximum is 12 L/min, and it has strong power and can run with low noise.
4. The operation of the pump provides resettable temperature control protection to reduce the temperature of the water fluctuating cold and hot.
5. The pump can be used in shower rooms or gardens, and can be installed in water tanks, wells or pools and other water sources.

Specification:

Item Type: Booster Pump
Model: WG-100
Rated Power: 100W
Rated Current: 0.4A
Maximum Lift: Approx. 10m / 32.8ft
Maximum : 12 L/min
Water Inlet and Outlet Thread Specifications Without Water Switch (manual): NPT 3/4 male thread
Water Inlet and Outlet Thread Specification with Water Switch (automatic) : NPT 1/2 male thread
Body Material: Stainless steel
Caliber: Approx. 15mm / 0.6in
Insulation Class: E
Capacitance: 5uf
Speed: 2860/min
Power Cord Length: Approx. 1m / 3.3ft
Size After Installation(L x W x H): Approx. 17 x 17 x 10cm / 6.7 x 6.7 x 3.9in
Application Scenarios:
1. Insufficient water pressure causes the water heater to not work
2. The water is too small, and domestic water becomes a problem
3. The water pressure is unstable and the floor is too high
4. The bath water is cold and hot, and the water is weak and intermittent.
How to Use:
1. First of all, you can directly connect the pipeline with the booster pump. At this time, the thread specification is NPT3/4, and the pipeline corresponding to the female thread can be connected.
2. Install the water switch and the pure copper joint kit, the thread specification after installation is NPT1/2, and connect the corresponding female threaded pipe
3. Plug in the power supply and switch to manual or automatic. Manual mode means that you do not need to install the water switch and pure copper connector kit, but need to manually control the water switch; the automatic mode is to install the water switch and pure copper connector kit, you can Automatically control the on and off of the water through the water switch.

Package List:

1 x Booster Pump

1 x Water Switch

2 x Sealing Ring

2 x Pure Copper Connector

1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.

1. Any questions, pls. contact us via ebay message or email us.We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. post a message again because sometimes our message system may block some emails.

2. If you are satisfied with our service, pls. kindly leave us a positive feedback and give us the Detailed Seller Rating with all "5 " in very area
3. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.

We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.

https://image-us.chengykj.com/upload/third_resource/image/shipc73.jpg