1Sets SG90 MG90s 9g Steering Gear Pan Tilt FPV Camera Support Accessories
Product name: 9g small servo (S version)
Gear media: Nylon
Operation dead zone: 10us
Response speed: 0.1sec/60degree (4.8v)
Operating temperature: 0-55 degrees
Brand new and high quality
Product torque: 1.6kg/cm (4.8V)
Operating voltage: 4.8V
Operating mode: Analog
Product size: 30.9 x 31.8 x 12.5 mm
The use of ordinary micro-motor, tension is second only to the 9g standard version of the servo, is currently a super good cost performance of the servo!
Due to the reduced tension, the manufacturer recommends only for ordinary small electric aircraft model, not recommended for larger fixed-wing and electric helicopter use!
Note: the pictures show the complete installation effect. The steering gear and camera need to be purchased separately. They are available in our store. This pan tilt is in bulk and can only be assembled with steering gear and camera.
With SG90 type steering gear, plastic gear 9g servo:
The rocker arm of the steering gear needs to be cut off a little before installation, and the installation of the steering gear on the base also needs to modify the rocker arm (remove the edge of the round hole, and then put the rocker arm in or trim the steering gear arm)!
At present, this kind of PTZ can only be installed with 28*28 camera modules, not 32 or 38 size cameras. (please know that the rudder arm of the steering gear needs to be trimmed.)
The 2-axis plastic pan tilt weighs 17 grams, which is suitable for 9g-12g steering gear. It has beautiful appearance, precise manufacture, no virtual position and no shaking. It has a steering gear wire winding clamp.
The product is shown in the figure, 4 nylon plastic parts, including screws. Self assembly is required.
Notice:
1. The real color of the item may be slightly different from the pictures shown on the website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data. Thank for your understanding.
3. 1cm=0.39''.
Package Included:
1Sets PTZ with 2 Servo
* Please make payment asap, then we can arrange shipment for you asap.
- Thanks for your bid
* We will arrange shipping for you within 24 Hours after payment cleared except the holidays.
* If you have changed your address, or want us to ship to another address, please change to the new address.
* We ship items to Worldwide. Thank you.
- International Buyers Please Note:
* Please check with your country customs office to determine what these additional costs will be prior to bidding/buying
*We will carefully test every item before shipment.The quality is guaranteed!
- Our working time:
* Hong Kong time : Monday to Saturday 8:30 am to 5:30 pm. * if you send email to us,In our working hours will be resumed within 24 hours. * If you we are not satisfied with us ,please contact me and don't give us negative or natural feedback,We must give you a satisfactory solution.
