Features:
• Change mode between cooling and heating
• Check the temperature by adjusting the temperature setting
value and the difference value
• Temperature calibration
• Delay protection of the cooling tax output
• Alarm if the temperature exceeds the temperature limit or if
there is a sensor error
Specification:
Temperature measuring range: -50 ° C ~ +99 ° C
Resolution: 0.1 ° C
Accuracy: +-1 ° C (-50 ° C ~ +70 ° C)
Sensor error delay: 1 minute
Performance recording: <3W
Sensor type: NTC
Relay contact capacity: two relays: cool 10a/220VAC; Heat
10a/220VAC
Among ambient temperature: 0 ° C ~ +60 ° C
Storage temperature: -30 ° C ~ +75 ° C
Relative humidity: 20 % ~ 85 % (no condensate)
Sensor length: 1m
Sensor diameter: 4 mm
Front panel size: 75 x 34.5mm
Product size: 75 x 34.5 x 85 mm
Mounting size: 71 x 29 mm
Menu instructions:
Code - Function - Setting Setting - Standard
F1 - Temperature target value - -50 ~ +99.9 ° C - 10 ° C
F2 - Different Soll Value - 0.3 ~ 10.0 ° C - 0.5 ° C
F3 - compressor delay time - 1 ~ 10 minutes - 3 minutes
F4 - temperature calibration value - -10 ° C ~ +10 ° C - 0 ° C
Package:
1 x Temperature controller
1 x NTC sensor
Safety regulations
• Danger:
1. Differentiate the sensor derivation, the power cable and the
output relay interface strictly from each other
and prevent incorrect connections or overload of the relay.
2. Dangers: Prohibit connecting wire terminals without power
shutdown.
• Warning:
Prohibit the use of the machine in an environment with excessive
moisture, high temperature, strong electromagnetic disorder or
strong corrosion.
• Note:
1. The power supply should correspond to the voltage value
specified in the instructions.
2. To avoid disorders, sensor dissipation and power cables
should be kept distance.