eBay

3AIX6040USB-1+3AIX6040USB-3+3AIX6040USB-4+TS007USB

Notes: Please prepare a computer with USB Interface.

Attention: It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the usb port driver. These issues are detailed and fully explained on the Software website.

Description:

Suitable forPCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper,

1. This CNC 6040 machine is suitable for industry, Technology Research, Advertising Design,

Arts Creation, Teaching, Student Project and Hobby Purposes.

2. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc.

3. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate,PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc.

4. The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner...

5. With the assist of the CNC ROUTER 6040T, your design idea will be real-time display.

cnc engraving machine parameters:

X, Y, Z Working Area: 600(Y)*390（X）*120(Z)mm
Outside dimension: 865*680*570mm（L*W*H）
Table size: 770（Y）*490（X）mm
Lathe structure: 6061/6063 Aluminium alloy
Max. Feeding height: ≤100mm

Drive unit:

X axis---1605 Ball Screws
Y axis---1605 Ball Screws
Z axis---1204 Ball Screws

Sliding unit:

X axis---High intensity Chromeplate shaft
Y axis---High intensity Chromeplate shaft
Z axis---High intensity Chromeplate shaft
Stepping motor: 57 two-phase 3A 150N.cm

Spindle motor:

1，Water cooled spindle motor can work longer time than air cooled motor.
2，Water cooled spindle motor has higher stability and better concentricity than air cooled motor.

(tips：1. The spindle motor must connect with the VFD.
2. It cannot directly connect with the supply voltage (AC220V).
3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.)

Outside dimension: 65*158mm
Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket
VOLTS, current, power: AC220 /50Hz, 5A, 1.5KW VFD
Spindle speed: 24000 rpm
Max working frequency: 60Hz
Principal axis collet: ER11collet，Standard configuration :6mm
Nut Model: ER11-A
Cooling: Water-cooling
Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM
Lubrication way: lubricated by high grease
Repeat accuracy: 0.05mm
Spindle precision: radial beat acuities 0.03mm
Carving Instructions: G code / TAB files / nc file / NCC files
Communication interface: through USB connection with computer

Software environment:32-bit version of Windows 2000, Windows XP, Windows Vista, or Windows 7 (64-bit versions will not work)

1Ghz CPU

512MB RAM

Non-integrated Video Card with 32MB RAM(Large G-code files, especially 3D files will require a video card with 512MB RAM or higher)

Maximum Idle speed:1500mm/min

Working Speed :50-1500mm / min (different material with different speed settings)

Friendly reminder:

The engraver will come with software（Free Version
If you followed the installation tips offered by us, it works like full version.）

installation tips:
The software perform better on the 32bites system computer.

Please close the firewall and antivirus software on the computer before DOWNLOADING AND installing the software.(This is very important)

Otherwise, the antivirus will regard the cnc software as virus and stop the installation.

PS:Please don't update the software when installed, then it will not need the license Numbers.

Control box parameters:

Operating Voltage: AC220V
Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive
Computer connection: USB port
Command code: G code
Protection: Emergency stop button

Feature:

1. The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used toprocess aluminum alloy and hard wood.

2. water cooling spindle works more stable and durable.

3. High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle.

4. Software Compatability：Emc2/Type3/ArtCAMParameter

Pack List:

1X main unit (Frame)
1X main unit (working base)
2X Fence baffle
1X control box
1X A axis
1X Sinal cable for A axis
1X pump
1X 25pin Parallel lines
2X cutter 2*6mm
2X cutter 3*6mm
10X 4*7mm round head
6X 4*10mm black Inner six angle screw with nut
8X 5*20mm black Inner six angle screw
4X 5*8mm Flat Philip's head screw with nut and gasket
8X 6*24mm BALCK FLAT Inner six angle screw
12X Aluminium fastener
1X 13-15# Wrench
1X 14-17# Wrench
2X six angle Wrench(3mm)
2X six angle Wrench(4mm)
1X Teflon tape
2X Fuse (5A)
1X Power cable
1X Manual

How to use:

1. Assembling and locating the CNC machine on steady desk well.

2. Make sure that your computer has a USB port output.

3. Place the contral box in a ventilated dry place where there is no dust, no moisture

4. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off.

5. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will damage the driver of the controller.

6. Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well.

7. Installing a CNC control software and Drive such as the EMC2on your computer.

8. Fllowing our manual or guideline to set uo the software.

9. Before turn on the machine, please check all the cable and water-cooling system to make sure they are working fine.

10.You can enjoy making you dream with using our CNC machine now.

If you have any problem. Please contact us through eBay Message and we will gladly assist you.