Electronic Hot Plate Welding Soldering Preheat Digital Packaging Machine 550W 

Product Parameters:

Voltage: 110v 60hz

Heating Body Power: 550w

Temperature Control Range: 50-350°C

Host Weight: 2.7kg (5.95lb)

Heating Area: 100mm*100mm(3.94*3.94inch)

Body Size: 22*22*14.5cm (8.66*8.66*5.71inch)

Display Mode: High-definition Lcd Screen Digital Display

Body: Iron Shell

Heating Plate: Pure Aluminum Plate

Introduction:

1. This Machine Is a Desktop Manual Packaging Machine with Small Volume.

2. Let Customers Use It According to Different Requirements.

3. Temperature Control Digital Display, Simple Operation and Convenient Use.

4. Cigarette, Cosmetics, Paper Box, Playing Card Blister Film Packaging Machine, Cellophane Packaging Machine

About the Display Device:

1. the First Line Indicates the Temperature

2. the Second Line Indicates the Set Temperature

3. Guidance for Setting Temperature:

* Click the "Set" Button, When the Number Is Flashing on the Second Line.

*Click the Mark of the "Appear" or "Decrease" Button to Set the Temperature.

*Click "Set" to Complete the Set Temperature, When the Top Line Temperature Reaches the Set Temperature, the Machine Can Start to Work.

4. Suggestions:

Usually 0.02mm Film Is Set at About 120 Degrees, and 0.025 Film Is Set at About 150c

(Cigarette Case Film Is About 0.02mm)

Feature:

1. Operation Method:

Put the Things That Need to Be Heat-sealed on the Heating Plate and Leave It for a Few Seconds.

2. Reasons and Solutions for Membrane Failure:

1) the Temperature Is Too Low; You Can Increase the Set Temperature.

2) If the Heat-sealing Time Is Too Short, the Heat-sealing Time Can Be Extended.

3. Reasons and Solutions for Film Rupture or Damage.

1) the Temperature Is Too High; You Can Lower the Set Temperature.

2) Shorten the Heat Sealing Time.

Packing List:

Host *1, Power Cord *1, Manual *1