This instrument kit is used to install instruments for vehicles, trucks, motor boats, yachts and other vehicles.
Good quality, can be replaced directly after purchase.
Product parameters:
Fixed size: 2 big gauge*85mm+ 4 small gauge*55m
Working voltage: 9-32 VDC
Oil pressure: 10-184ohms, display 0-145 PSI
6 Gauges Set ,Speedo,Tacho,Fuel Level Gauge,Oil Pressure,Volt,Water Temp
Fuel level: 240-33 ohms, E-F.
Temperature: 287.4-22.4 ohm, display 100-250F
Voltage: 8-16V
Style: stainless steel plate
Backlight: Red
2 big gauge*85mm+ 4 small gauge*55m
-Operation mode: LCD display, stepping motor
Speedometer:
Application: motorcycle, truck, boat (the driving distance cannot be reset, just like on a car, and the mileage will continue to increase)
Working voltage: 9-32V
Fixed size: 85mm (about 3-3/8 inches)
Operation mode: LCD display with 7-color backlight
Indication range: 0-200KM / H
Signal: GPS
Weight: 327 grams
Tachometer:
Indication range: 0-8000 RPM
Operation mode: LCD display with red backlight
Description: Magnet movement gauge
Weight: 240g
Touch the sensor button to change the setting parameters.
Easy to set pulse/revolution.
Accept all input signals.
Small specifications:
Working voltage: 9-32VDC
Style: stainless steel plate
Background color: black
Backlight: Red
The weight of an item: 130g
Input range:
Oil pressure: 10-184ohms, display 0-145 PSI
Fuel level: 240-33ohms, E-F.
Temperature: 287.4-22.4ohms, display 100-250F
Voltage: 8-16V
Features:
☆ The needle is driven by the principle of moving magnet, which has good durability and vibration resistance.
☆ IP67 waterproof and dust-proof rating
☆ The stepping motor is suitable for the whole series of stepping gauges and has the characteristics of low power
☆ Large consumption, long life, high precision
☆ With curved glass (with anti-fog function)
☆ Using ultra-wide working voltage design (long-term working voltage: 9-32V, maximum reach: 36V (≤1 minute)).
The package includes:
1. 2 big gauge*85mm+ 4 small gauge*55m
2. 6*Multi-plug socket
NOTE:
★ Connection tips: the red + orange wire is connected to the positive pole, and the blue wire is used for the negative pole. And the black signal wire is connected to the sensor. (Voltmeter has no black wire)
★ Installation tips: Before installation, first make a hole in the panel (diameter: 52-53mm), and at the same time make sure there is a space (70mm in the backyard of the panel)
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
