Function:

using modern BF998 and BCX54 semi conductors.Real class A circuitry, clean reception without IMD.  coax connection.Broadband R/C coupling to the receiver, no transformer.

Features:

this antenna should be positioned as high and free from metal conductors as possible.

the ground plane of the PCB must NOT be lower than the top of the mast.

(the connection to and the antenna itself must be ABOVE the top of the mast).

install the Miniwhip onto a well grounded mast.

connect "GND" of the Miniwhip PCB to that mast.

place HI-Ui ferrite cores (Ui between 5000 and 10.000) on the beginning and end of all cables to block cable noise currents.

Specification:

Frequency range: 10 kHz - 30 MHz

 Power: 12 - 15 volts at 150 mA

 Second order output intercept point: > + 70 dBm

 Third order output intercept point: > + 30 dBm

 Maximum output power: in excess of - 15 dBm

 Connector: BNC

 Feed line: 50 - 100 ohm coaxial cable

Model: Shortwave Antenna Set*1, Antenna *1 (optional)

Packing list:

Shortwave Antenna Set*1

or Antenna *1

We accept payment via Paypal only.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address.

Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. 

It takes about 7-15 working days to UK; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.