TLV3501 High Frequency Transducer 1Hz--120MHz Bandwidth RF Frequency Converter DC 2.7-5V Frequency Meter Board

Feature:
1. High-Speed Comparator: The high frequency transducer is a single-channel high-speed open-drain output comparator with a delay time of 4.5ns. It operates at a supply voltage range of +2.7V to +5.5V, making it an ideal choice for low-voltage applications. 
2. Wide Input Common Mode Range: With an input common mode range that exceeds the swing amplitude, this RF mixer module is suitable for applications requiring low voltage operation. It offers rail-to-rail output, allowing direct driving of CMOS or TTL logic.
3. Signal Conditioning: This RF frequency converter can shape wide voltage range periodic signals and serve as a front-end conditioning module for time-domain measurements such as frequency and phase differences. It can be used as the front-end module for the digital frequency counter in the 2015 National College Student Electronic Design Competition (Category F).
4. Easy to Use: No threshold setting is required to shape sine waves, square waves, and triangle waves into square waves. This makes frequency meter board convenient to use without the need for debugging. Additionally, it offers excellent scalability with minimal component modifications.
5. Versatile Application: The RF signal converter has various applications, including signal shaping, frequency measurement, phase detection, and more. Its flexibility and reliability make it a valuable tool for electronic projects and experimentation.

 

Specification:
Certification: NONE
Origin: Mainland China
DIY Supplies: ELECTRICAL
Display Type: Analog Only
Model Number: High Frequency Transducer
Dimensions: 52 x 25 x 10mm/2.0 x 1.0 x 0.4inch
Supply voltage: 2.7-5VDC
Input voltage: 8-1000mV (rms)
Output level: rail-to-rail output, can directly drive TTL/CMOS level
Input frequency: 1Hz-120MHz, as small as 1Hz
Interface form: SMA female (external screw inner hole)
Input impedance: 20K ohms 
Product Application:
The TLV3501 is a single channel high speed push-pull output comparator with a delay time of 4.5ns and supply voltage: + 2.7V to + 5.5V, with an out of swing input common mode range making it ideal for low voltage applications. The rail-to-rail outputs can directly drive CMOS or TTL logic. The module can be used for shaping wide voltage range periodic signals as a front-end conditioning module for time domain measurements such as frequency and phase difference, and can be used as a front-end module for the digital frequency meter in Question F of the 2015 National Student Electronic Design Competition.
Product features:
No threshold setting is required to shape sine, square and triangle waves into square waves, which is easy to use and requires no debugging; it is also very scalable and requires only a small modification of the original components.
Product use:
1. sine wave to square wave
2. Over-zero comparator
3. general purpose comparators

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.